Effects of low Reynolds number on turbine blade tip leakage flow

被引:0
|
作者
Sun, Hao [1 ]
Xue, Zhiheng [1 ]
Li, Jun [1 ]
Feng, Zhenping [1 ]
机构
[1] School of Institute of Turbomachinery, Xi'an Jiaotong University, Xi'an 710049, China
关键词
Low Reynolds number - Numerical results - Preconditioning method - Tip leakage flow - Tip leakage vortex - Total-pressure loss - Turbine blade tip - Turbine cascade;
D O I
暂无
中图分类号
学科分类号
摘要
The flow field of a small gas turbine cascade was numerically simulated with the preconditioning method at low Reynolds number varying from 4.40×104 to 2.55×105. Both the cases with and without tip clearance were considered in the simulation. The numerical results of the loss caused by the tip clearance agree well with the experimental data and the values predicted by the Denton formula. It is indicated that this loss will not change with the increase of the Reynolds number but the intensity of the passage vortex increases with the decrease of the Reynolds number. The tip leakage flow will weaken with the increase of the passage vortex because of the interaction between the passage vortex and the tip leakage vortex, and the position of the tip leakage vortex is more close to the middle of the passage. In addition, the distributions of the total pressure loss and the flow angle at the exit of the cascade are influenced by the intensity and the position of the tip leakage vortex.
引用
收藏
页码:11 / 15
相关论文
共 50 条
  • [31] Research on Induced Vibration of Leakage Flow in Blade Tip Clearance of Steam Turbine
    Li, Pan
    Cao, Lihua
    Si, Heyong
    Hu, Pengfei
    Xue, Chuan
    [J]. Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2022, 43 (11): : 2914 - 2925
  • [32] Leakage flow reduction in different configuration of labyrinth seal on a turbine blade tip
    Kaczynski, Piotr
    Szwaba, Ryszard
    Wasilczuk, Filip
    Flaszynski, Pawel
    Doerffer, Piotr
    [J]. XXIII FLUID MECHANICS CONFERENCE (KKMP 2018), 2018, 1101
  • [33] CHARACTERISTICS OF TIP LEAKAGE FLOW OF THE TURBINE BLADE WITH CUTBACK SQUEALER AND COOLANT INJECTION
    Wang, Jianhua
    Liu, Yalin
    Wang, Xiaochun
    Du, Zhineng
    Yang, Shijie
    [J]. PROCEEDINGS OF THE ASME TURBO EXPO 2010: TURBOMACHINERY: AXIAL FLOW FAN AND COMPRESSOR AERODYNAMICS DESIGN METHODS, AND CFD MODELING FOR TURBOMACHINERY, VOL 7, PTS A-C, 2010, : 1243 - 1251
  • [34] Numerical analysis on leakage flow of blade tip stepped seal in steam turbine
    Cao L.-H.
    Jia Y.-M.
    Li P.
    Hu P.-F.
    Li Y.
    [J]. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2016, 50 (08): : 1545 - 1550
  • [35] POTENTIAL FLOW FIELD GENERATED BY DOWNSTREAM MOVING BARS AND PROPAGATED ON A TURBINE BLADE AT LOW REYNOLDS NUMBER
    Penin, Veronique
    Kulisa, Pascale
    Bario, Francois
    [J]. PROCEEDINGS OF THE ASME TURBO EXPO 2011, VOL 7, PTS A-C, 2012, : 1751 - 1760
  • [36] Effects of the novel rib layouts on the tip leakage flow pattern and heat transfer performance of turbine blade
    Jiang, Shijie
    Li, Zhigang
    Li, Jun
    Song, Liming
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2020, 234 (08) : 1446 - 1459
  • [37] Effects of Blade Tip Suction on Cascade Gap Leakage Flow
    Zhang B.-T.
    Liu B.
    Zhao H.
    [J]. Tuijin Jishu/Journal of Propulsion Technology, 2020, 41 (08): : 1701 - 1709
  • [38] Turbulence modelling of low Reynolds number flow effects around a vertical axis turbine at a range of tip-speed ratios
    McNaughton, J.
    Billard, F.
    Revell, A.
    [J]. JOURNAL OF FLUIDS AND STRUCTURES, 2014, 47 : 124 - 138
  • [39] PIV maps of tip leakage and secondary flow fields on a low speed turbine blade cascade with moving endwall
    Palafox, P.
    Oldfield, M. L. G.
    LaGraff, J. E.
    Jones, T. V.
    [J]. PROCEEDINGS OF THE ASME TURBO EXPO 2005, VOL 6, PTS A AND B, 2005, : 465 - 476
  • [40] Tip Leakage Flow and Loss of the Flat Tip with Partial Shroud in a Turbine Blade Cascade of Strong Reaction
    Bong, Seon Woo
    Lee, Sang Woo
    [J]. TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2023, 47 (07) : 367 - 377