Effect of several fillers on brazing metal strength and interface of titanium alloy and stainless steel brazing joint

被引：0
|
作者：
Yang, Jing [1 ]
Lai, Xu-Ping [1 ]
Zhu, Chang-Gui [1 ]
Zhu, Jin-Xia [1 ]
Liu, Xiao-Rong [1 ]
Yang, Jun [1 ]
机构：
[1] National Key Laboratory for Nuclear Fuel and Materials, Nuclear Power Institute of China, Chengdu 610041, China
来源：
Hedongli Gongcheng/Nuclear Power Engineering | 2008年 / 29卷 / 01期
关键词：
Electron probe microanalysis - Interfaces (materials) - Mechanical properties - Morphology - Scanning electron microscopy - Stainless steel - Titanium alloys;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Four kinds of silver base brazing materials were adopted for fabricating brazing joints of titanium alloy and stainless steel. The mechanical properties of brazing metal at contact face was measured and the fracture morphology and structure of interface were studied by mechanical test, metallographic examination, SEM analysis and electron probing analysis. The result shows that the strength of brazing metal at stainless steel/Ag95CuLi/Titanium alloy was 220 MPa, 242 MPa at stainless steeVAg88A110MnSi/ritanium alloy, 123 MPa at stainless steel/Ag85Al8Sn/Titanium alloy, and 280 MPa at stainless steel/Ag85A18SnNi/Titanium alloy. The fragile phase was easy formed in the diffusion part of stainless steel/Ag95CuLi, and cracking in the stainless steel/Ag88A110MnSi. And there is a wonderful coalescence on metallurgy between the brazing materials and titanium alloy or stainless steel.
引用
收藏
页码：61 / 65
相关论文
共 50 条
  • [41] Effect of brazing temperature on tensile strength and microstructure for a stainless steel plate-fin structure
    Jiang, Wenchun
    Gong, Jianming
    Tu, S. T.
    MATERIALS & DESIGN, 2011, 32 (02) : 736 - 742
  • [42] Effect of Ni on the wetting and brazing characterization of 304 stainless steel by Ag-Cu alloy
    Mu, Guoqian
    Qu, Wenqing
    Zhang, Yanhua
    Zhuang, Hongshou
    JOURNAL OF MATERIALS SCIENCE, 2023, 58 (14) : 6297 - 6312
  • [43] Interface characteristics and mechanical property of titanium/steel joint by electron beam brazing with 72Ag-28Cu filler metal
    Han, Ke
    Wang, Ting
    Chang, Shijie
    Tang, Qi
    Zhang, Binggang
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 59 : 58 - 67
  • [44] TIG welding-brazing joint of aluminum to stainless steel with hot wire
    何欢
    林三宝
    陈哲
    范成磊
    杨春利
    China Welding, 2013, 22 (03) : 25 - 30
  • [45] Capillary electron beam brazing of stainless steel tube-to-plate joint
    Li, Shao-Qing
    Zhang, Yu-Xin
    Lu, Feng-Gui
    Yao, Shun
    Hanjie Xuebao/Transactions of the China Welding Institution, 2005, 26 (04): : 73 - 75
  • [46] Analysis of intermetallic layer in dissimilar TIG welding-brazing butt joint of aluminium alloy to stainless steel
    Song, J. L.
    Lin, S. B.
    Yang, C. L.
    Fan, C. L.
    Ma, G. C.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2010, 15 (03) : 213 - 218
  • [47] Vacuum brazing of Zircaloy-4 and stainless steel using Ag-Cu-Ti brazing filler metal
    Qi Kai
    Li Ruifeng
    PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 2069 - 2073
  • [48] Microstructure and strength of zirconia/stainless steel joints prepared by pressureless active brazing
    Liu, Guiwu
    Qiao, Guanjun
    Wang, Hongjie
    Yang, Jianfeng
    Lu, Tianjian
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2009, 10 (04): : 567 - 570
  • [49] Research on vacuum brazing of W-Cu composite to stainless steel with Cu-Mn-Co brazing metal
    Liang, Qiuhui
    Xia, Chunzhi
    Xu, Xiangping
    Zou, Jiasheng
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2015, 22 (03) : 245 - 250
  • [50] Microstructure and mechanical property in laser welding-brazing of stainless steel and titanium alloy using 63Sn-37Pb alloy as filler metal
    Yan Zhang
    YanKun Chen
    JianPing Zhou
    DaQian Sun
    HongMei Li
    Welding in the World, 2020, 64 : 257 - 266
12345