Treatment technology and method of low-to-moderate production coalbed methane wells in Hancheng mining area

被引:0
|
作者
机构
[1] Shao, Xian-Jie
[2] Dong, Xin-Xiu
[3] Tang, Da-Zhen
[4] Wu, Ze
[5] Li, Shi-Cai
[6] Sun, Yu-Bo
[7] Xu, Hao
来源
Shao, X.-J. (shaoxianjie6@qq.com) | 1600年 / Science Press卷 / 25期
关键词
Coal bed methane - Coal bed methane wells - Low production wells - Mining areas - Production wells - Single well production - Stress sensitivity - Treatment technologies;
D O I
10.11764/j.issn.1672-1926.2014.03.0435
中图分类号
学科分类号
摘要
Hancheng mining area has a great number of coal seams and abundant reserves. However, faults are widely developed, the single layer is thin, and the porosity and permeability are low. The drainage time is long, the production fluctuated seriously during the producing process. There is a high ratio of low-to-moderate production wells in Hancheng mining area. It is an urgent subject to improve single well production, which faces the current coalbed methane development in China. The influencing factors that affect low production wells are analyzed according to geological and engineering aspects. Firstly, the production layer is thin and the reserve controlled by single well is limited. Secondly, the physical property is poor and the production is low. Thirdly, the faults communicate with fracturing fractures, and water has channeling between adjacent layers. Fourthly, the cementing quality is poor or even has no well cementation in shallow layers, causing cement channeling outside casing. Fifthly, the fracturing measure does not meet the designed scale, and the effective seepage radius is small and the stable production period is short. Sixthly, the draining and producing system is unreasonable, leading to stress sensitivity of permeability, and the production declines sharply. According to the research results, corresponding adjustment plan and measures are put forward, including optimizing perforated layers to increase production layer thickness; using multiple fracturing technology in the appropriate production stage to improve seepage area; plugging workover for channeling wells; drilling sidetracking horizontal wells after plugging old wells for well channeling along faults; establishing a reasonable draining and producing system to prolong the stable production period through permeability project intervention. The results have achieved good results in practical application and provide reference for the development of the same type of mining area.
引用
收藏
相关论文
共 42 条
  • [31] Best practices for the determination of low-pressure/permeability coalbed methane reservoirs, Yuwu Coal Mine, Luan mining area, China
    Tian, Lin
    Cao, Yunxing
    Chai, Xuezhou
    Liu, Tongji
    Feng, Peiwen
    Feng, Hongmei
    Zhou, Dan
    Shi, Bin
    Oestreich, Randy
    Rodvelt, Gary
    FUEL, 2015, 160 : 100 - 107
  • [32] Best practices for the determination of low-pressure/permeability coalbed methane reservoirs, Yuwu Coal Mine, Luan mining area, China
    Collaborative Innovation Center of Coalbed Methane and Shale Gas for Central Plains Economic Region, Henan Province, Henan Polytechnic University, Jiaozuo
    454000, China
    不详
    Henan
    454000, China
    不详
    Shanxi
    046200, China
    不详
    Henan
    454000, China
    不详
    IL
    62854, United States
    不详
    PA
    15317-5817, United States
    Fuel, (100-107):
  • [33] Process parameters design method of drainage gas recovery technology in gas-driven pump for coalbed methane production
    Haiwen, Wang
    Changjiang, Liu
    JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2021, 207
  • [34] A New Method for Numerical Simulation of Coalbed Methane Pilot Horizontal Wells-Taking the Bowen Basin C Pilot Area in Australia as an Example
    Wang, Xidong
    Duan, Lijiang
    Zhang, Songhang
    Tang, Shuheng
    Lv, Jianwei
    Li, Xudong
    PROCESSES, 2024, 12 (03)
  • [35] Monitoring technology and method of ecological environment rehabilitation and treatment in Jvhugeng mining area
    Li C.
    Wang T.
    Wang H.
    Hu Z.
    Jiang X.
    Liang Z.
    Wang W.
    Du B.
    Meitan Xuebao/Journal of the China Coal Society, 2021, 46 (05): : 1451 - 1462
  • [36] Low-rank coalbed methane production capacity prediction method based on time-series deep learning
    Wei, Xiaoyi
    Huang, Wensong
    Liu, Lingli
    Wang, Jianjun
    Cui, Zehong
    Xue, Liang
    ENERGY, 2024, 311
  • [37] A Method for Estimating Hydrocarbon Cumulative Production Distribution of Individual Wells in Naturally Fractured Carbonates, Sandstones, Shale Gas, Coalbed Methane and Tight Gas Formations
    Aguilera, R.
    JOURNAL OF CANADIAN PETROLEUM TECHNOLOGY, 2010, 49 (08): : 53 - 58
  • [38] Production characteristics and drainage optimization of coalbed methane wells: A case study from low-permeability anthracite hosted reservoirs in southern Qinshui Basin, China
    Liu, Huihu
    Sang, Shuxun
    Formolo, Michael
    Li, Mengxi
    Liu, Shiqi
    Xu, Hongjie
    An, Shikai
    Li, Junjun
    Wang, Xingzhen
    ENERGY FOR SUSTAINABLE DEVELOPMENT, 2013, 17 (05) : 412 - 423
  • [39] Multiscale Fracturing in Medium- to Low-Rank Coals and Its Implications on Coalbed Methane Production in the Baode Area, Eastern Ordos Basin, China
    Zhang, Wei
    Zhao, Baoshan
    Zhang, Qingfeng
    Zhang, Jikun
    Li, Ziling
    Sun, Xiaoguang
    Yan, Mingming
    GEOFLUIDS, 2022, 2022
  • [40] Research and Application of High-Production Area Seismic Prediction Technology for High-Rank Coalbed Methane Reservoir (vol 55, pg 606, 2019)
    Yumin, Liu
    Xuesong, Li
    Yonghe, Sun
    Minghui, Li
    Jingguo, Du
    CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS, 2020, 55 (06) : 832 - 832