Study on Simplified Alternative Method for Downstream Boundary of Centrifugal Compressor

被引:0
|
作者
Su, Bo-Tai [1 ]
Yang, Ce [1 ]
Zhang, Han-Zhi [1 ]
机构
[1] School of Mechanical Engineering, Beijing Institute of Technology, Beijing,100081, China
关键词
Boundary conditions - Compressors;
D O I
暂无
中图分类号
学科分类号
摘要
The casing-wall static pressure of the compressor in this paper has a very interesting phenomenon under a small mass flow rate. Four static pressure bands with high/low alternating distribution are formed in the circumferential direction, which is called the static pressure circumferential double-peak distribution. In order to study the formation mechanism of static pressure circumferential double-peak distribution, a simplified alternative method of downstream boundary is proposed. The complicated downstream boundary is simplified into a form with only local high static pressure and circumferential pressure gradient. The compressor volute and outlet pipe are removed, and the simplified boundary conditions are directly imposed to the diffuser outlet. The results show that under the simplified boundary condition, the casing-wall static pressure of the compressor can still show a circumferential double-peak distribution, which is very similar to that with volute. Furthermore, the circumferential pressure gradient is removed and only the local high static pressure region is retained. The static pressure circumferential distribution is also very similar to that with volute, which proves that the static pressure circumferential distribution is mainly affected by the downstream high static pressure region induced by volute. © 2022, Science Press. All right reserved.
引用
收藏
页码:82 / 90
相关论文
共 50 条
  • [31] Aerodynamic instabilities modeling under asymmetric boundary in a centrifugal compressor for turbocharger
    Hu, Chenxing
    Li, Xue
    Zheng, Siyu
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2023, 237 (01) : 193 - 206
  • [32] AN INVESTIGATION OF INFLUENCE OF BOUNDARY LAYERS ON PERFORMANCE OF CENTRIFUGAL-COMPRESSOR IMPELLERS
    LOHMANN, RP
    JOURNAL OF BASIC ENGINEERING, 1966, 88 (01): : 71 - &
  • [34] Research on matching design method of LSVD in centrifugal compressor
    Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing
    100190, China
    不详
    100049, China
    Kung Cheng Je Wu Li Hsueh Pao, 12 (2536-2543):
  • [35] ADVANCED METHOD FOR THE MANUFACTURE OF CENTRIFUGAL COMPRESSOR IMPELLERS.
    Kolomytsev, E.A.
    Taradonov, V.I.
    Chemical and Petroleum Engineering, 1975, 11 (7-8) : 732 - 733
  • [36] Extensive study on the control of centrifugal compressor surge
    Arnulfi, G. L.
    Blanchini, F.
    Giannattasio, P.
    Micheli, D.
    Pinamonti, P.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2006, 220 (A3) : 289 - 304
  • [37] EXPERIMENTAL STUDY OF VANED DIFFUSERS IN CENTRIFUGAL COMPRESSOR
    Jaatinen, Ahti
    Gronman, Aki-Pekka
    Turunen-Saaresti, Teemu
    Backman, Jari
    PROCEEDINGS OF THE ASME TURBO EXPO 2010: TURBOMACHINERY: AXIAL FLOW FAN AND COMPRESSOR AERODYNAMICS DESIGN METHODS, AND CFD MODELING FOR TURBOMACHINERY, VOL 7, PTS A-C, 2010, : 1983 - 1995
  • [38] A practical method to identify the potential resonance of centrifugal compressor impellers
    Wang, Q
    IMAC - PROCEEDINGS OF THE 17TH INTERNATIONAL MODAL ANALYSIS CONFERENCE, VOLS I AND II, 1999, 3727 : 1597 - 1602
  • [39] Preliminary design of centrifugal compressor using multidisciplinary optimization method
    Sun Shouyi
    Yue Zhufeng
    Li Lei
    Zhang Mengchuang
    Yang Weizhu
    MECHANICS & INDUSTRY, 2019, 20 (06)
  • [40] Development of a performance prediction method for centrifugal compressor channel diffusers
    Jeong-Seek Kang
    Sung-Kook Cho
    Shin-Hyoung Kang
    KSME International Journal, 2002, 16 : 1144 - 1153