Transient Flow Characteristics in Self-Priming Centrifugal Pump Volute

被引：0
|
作者：
Mou J. [1 ]
Wu Z. [1 ]
Zhou P. [1 ]
Gu Y. [1 ]
Wu D. [2 ]
Ren Y. [2 ]
机构：
[1] College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou
[2] Zhijiang College, Zhejiang University of Technology, Hangzhou
来源：
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University | 2018年 / 52卷 / 04期
关键词：
Pressure fluctuation; Reflux hole; Self-priming centrifugal pump; Transient flow characteristics; Volute;
D O I：
10.16183/j.cnki.jsjtu.2018.04.011
中图分类号：
学科分类号：
摘要：
Because of the existence of reflux hole in the self-priming centrifugal pump volute, its internal transient flow is more complicated than the ordinary centrifugal pump, and it largely determines the running stability. In order to study the transient flow characteristics inside a self-priming centrifugal pump volute, the three-dimensional unsteady flow under various operating conditions of a model pump with and without reflux hole were numerically simulated to investigate the volute pressure fluctuations and transient flow characteristics near the reflux hole. The results showed that the existence of reflux hole makes the volute pressure fluctuation more severe and variable. In the volute cross-sections with the largest pressure fluctuation amplitude, there were relatively strong, symmetrical, different sizes and reverse secondary flow vortexes. The vorticity was great at the exit of reflux hole to volute, and there were vortexes flow structures that change periodically over time in the cross-section of both directions. The maximum pressure pulsation amplitude of volute with reflux hole was larger than that without reflux hole. The increased amplitudes were, respectively, 35.5%, 13.7% and 19.6% under the conditions that flow rates were 0.8, 1.0 and 1.2 times of the design flow rate. © 2018, Shanghai Jiao Tong University Press. All right reserved.
引用
收藏
页码：461 / 468
页数：7
相关论文
共 21 条
  • [11] Cui Y., Si Y., Yi T., Et al., Numerical studyon separation chamber of rotational flow in self-priming pump, Drainage and Irrigation Machinery, 27, 2, pp. 119-123, (2009)
  • [12] Zhang X., Li G., Li J., Numerical simulation of unsteady flow in centrifugal pump volute, Transaction of the Chinese Society for Agricultural Machinery, 37, 6, pp. 63-68, (2006)
  • [13] Wang S., Tan L., Wang Y., Cha-racteristics of unsteady flow in a centrifugal pump volute, Journal of Vibration and Shock, 33, 11, pp. 43-48, (2014)
  • [14] Menggen Q., Tan L., Cao S., Et al., Numerical simulation and analysis of unsteady flow characteristics in centrifugal pump volute, Journal of Mechanical Engineering, 51, 22, pp. 183-190, (2015)
  • [15] Liu J., Su Q., The numerical simulation of gas and liquid two phase-flow in self-priming pump, Journal of Agricultural Machinery, 40, 9, pp. 73-76, (2009)
  • [16] Li H., Shen Z.H., Liu J.R., Et al., Influence of pressure fluc-tuation on reflux valve in a self-priming pump with outer recirculation, Proceedings of ASME 20103rd Joint US-European Fluids Engineering, (2010)
  • [17] Li H., Xu D., Tu Q., Et al., Numerical simulation of the gas-liquid two phase flow in start process of self-priming pump, Journal of Agricultural Engineering, 29, 3, pp. 77-83, (2013)
  • [18] Li H., Jiang B., Lu T., The visualization test of gas-liquid two phase flow in self-priming pump process, Journal of Agricultural Machinery, 46, 8, pp. 59-65, (2015)
  • [19] Derakhshan S., Mohammadi B., Nourbakhsh A., Incomplete sensitivities for 3D radial turbomachinery blade optimization, Computers & Fluids, 37, 10, pp. 1354-1363, (2008)
  • [20] Wu D., Yang S., Xu B.J., Et al., Investigation of CFD calculation method of a centrifugal pump with unshrouded impeller, Chinese Journal of Mechanical Engineering, 27, 2, pp. 376-384, (2014)
123