High speed milling of integral parts with thin walls

被引：0

作者：

School of Mechanical Engineering, Tongji University, Shanghai 200092, China ^{[1
]}

不详 ^{[2
]}

机构：

来源：

Tongji Daxue Xuebao | 2007年 / 4卷 / 522-525期

关键词：

Aluminum alloys - Cutting tools - Deformation - Guides (mechanical) - Heat treatment - Optimization - Waveguide components;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

This paper presents a brief analysis of the features specialties and problems of machining of integral parts with thin walls. The high-speed milling of the aluminum alloy tri-wave-guide samples is presented as a case study. Its machining time reduces to about one third of conventional speed milling time under conditions of keeping small cutting deformation and high machining quality, and omission of the heat treatment working procedure. This is achieved through suitable clamping of the samples, suitable cutting procedure, optimizing of milling art and tool path, reasonable choice of cutting tool, optimizing of cutting parameters, suitable lubricating and cooling. The practical experiences and measurement data obtained show that high cutting speed, high feed rate and small cutting depth should be adopted for high speed milling of integral parts with thin walls. This could promote the implementation of high speed milling.

引用

页码：522 / 525

共 50 条

[21] High speed milling
Schulz, Herbert
Cus, Franc
Strojniski Vestnik/Journal of Mechanical Engineering, 1988, 34 (4-6): : 44 - 48
[22] Avoiding instability on the milling of parts with thin features
Campa, F. J.
Lopez de Lacalle, L. N.
Herranz, S.
Lamikiz, A.
Rivero, A.
ADVANCES IN MATERIALS PROCESSING TECHNOLOGIE, 2006, 526 : 37 - 42
[23] Ensuring surface quality of parts in high-speed end milling of quenched steel
Kiryushin I.E.
Kiryushin D.E.
Nasad T.G.
Russian Engineering Research, 2008, 28 (12) : 1248 - 1251
[24] The CAM as the centre of gravity of the five-axis high speed milling of complex parts
de Lacalle, LNL
Lamikiz, A
Muñoa, J
Sánchez, JA
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2005, 43 (10) : 1983 - 1999
[25] Influence of spindle speed on tool wear in high-speed milling of Inconel 718 curved surface parts
Ma, Jianwei
Gao, Yuanyuan
Jia, Zhenyuan
Song, Dening
Si, Likun
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2018, 232 (08) : 1331 - 1341
[26] NO HIGH SPEED MILLING WITHOUT HIGH SPEED PROGRAMMING
Gunnink, Jan Willem
van der Zwaags, Johnny
Knoppers, Rik
Whittington, Chris
PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2003, : 436 - 441
[27] Estimation of forming the parts with high thin walls while stamping them of crystallized metal
Rakogon, A.I.
Kuznechno-Shtampovochnoe Proizvodstvo (Obrabotka Metallov Davleniem), 2002, (09): : 12 - 15
[28] Finite Element Simulation and Deformation Control of High-Speed Milling of Al7050-T7451 Thin-Walled Parts
Yang S.
Yang J.
Wang F.
Recent Patents on Engineering, 2022, 16 (06)
[29] Tool path strategies for high speed milling aluminum workpieces with thin webs
Smith, S
Dvorak, D
MECHATRONICS, 1998, 8 (04) : 291 - 300
[30] Study on the Stability of High-Speed Milling of Thin-Walled Workpiece
Wang, Tongyue
He, Ning
Li, Liang
MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 1849 - +

← 1 2 3 4 5 →