TiC/Ni3Al composite coating synthesized in situ on a steel and slurry erosionwear resistance

被引：0
|
作者：
机构：
[1] Zhu, Tao
[2] Ji, Xiulinx
[3] Zhang, Qiuyang
[4] Wang, Shuqi
[5] Shi, Wei
来源：
Wang, S. (shuqi_wang@ujs.edu.cn) | 2013年 / Chinese Journal of Materials Research卷 / 27期
关键词：
Gas metal arc welding - Ternary alloys - Tungsten - Aluminum alloys - Gas welding - Interfaces (materials) - Metallic matrix composites - Chromium alloys - Molybdenum alloys - Titanium alloys - Erosion;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A TiC/Ni3Al intermetallic matrix composite coating was fabricated on a steel by gas tungsten arc welding. The microstructure and properties of the coating were investigated. The formation mechanism and erosive wear mechanism of the coating were also discussed. The results show that TiC/Ni3Al coating formed on the steel without any intermediate phases and the distribution of TiC particles is homogeneous. The hardness and the number of particles of the coating increased with increasing (Ti+C) content in the preform. The interface between the coating and steel substrate has a good metallurgical bonding. The morphology of TiC particles changed from fine spherical to equiaxial and then to dendritic shape. From the coating surface to the interface, the distributions of Al, Ni, and Fe are gradual variation. However, Ti exists in the coating in the form of TiC particle. The composite coating has obviously lower mass loss than that of H13 and 0Cr13Ni5Mo steels at any impact angle, showing superior erosion resistance. © Copyright.
引用
收藏
相关论文
共 50 条
  • [21] Preparation of TiC/Ni3Al composites by upward melt infiltration
    Pan, Y
    Sun, KW
    [J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2000, 16 (04) : 387 - 392
  • [22] Effect of Mo addition on the wettability between Ni3Al and TiC
    Shen, Q
    Zhang, LM
    Tu, R
    [J]. JOURNAL OF INORGANIC MATERIALS, 2002, 17 (06) : 1306 - 1310
  • [23] Melt-infiltration processing of TiC/Ni3Al composites
    K. P. Plucknett
    P. F. Becher
    R. Subramanian
    [J]. Journal of Materials Research, 1997, 12 : 2515 - 2517
  • [24] Study of Ni3Al coating on carbon steel surface via the SHS casting route
    Chinese Acad of Sciences, Lanzhou, China
    [J]. Surf Coat Technol, 1 (44-51):
  • [25] Preparation of TiC/Ni3Al Composites by Upward Melt Infiltration
    Yi PAN (Department of Materials Science and Engineering
    [J]. Journal of Materials Science & Technology, 2000, (04) : 387 - 392
  • [26] Melt processed TiC reinforced Ni3Al matrix composites
    Sen, S.
    Stefanescu, D.M.
    Dhindaw, B.K.
    [J]. 1993,
  • [27] Melt-infiltration processing of TiC/Ni3Al composites
    Plucknett, KP
    Becher, PF
    Subramanian, R
    [J]. JOURNAL OF MATERIALS RESEARCH, 1997, 12 (10) : 2515 - 2517
  • [28] Effect of particles size of TiC on oxidation resistance of in-situ TiC/ Ni composite
    Zhao, Ziyan
    Zheng, Kaiyue
    Yu, Xianghui
    Wang, Lujie
    Yao, Shuyu
    Qi, Qian
    [J]. HELIYON, 2023, 9 (07)
  • [29] Structure and properties of cast Ni3Al/TiC and Ni3Al/TiB2 composites Part II.: Investigation of mechanical and tribological properties and of corrosion resistance of composites based on intermetallic phase Ni3Al reinforced with particles of TiC and TiB2
    Fras, E
    Janas, A
    Kurtyka, P
    Wierzbinski, S
    [J]. ARCHIVES OF METALLURGY AND MATERIALS, 2004, 49 (01): : 113 - 141
  • [30] Preparation and Tribological Properties of Ni3Al Matrix Self-Lubricating Composite Coating
    Li, Wensheng
    Fan, Xiangjuan
    Yang, Jun
    Zhu, Shengyu
    Hu, Wei
    Sun, Yang
    [J]. Mocaxue Xuebao/Tribology, 2018, 38 (06): : 626 - 634
12345