A study of power conversion system for energy harvester using a piezoelectric materials

被引:0
|
作者
An H. [1 ]
Kim Y.-C. [2 ]
Cha H. [1 ]
机构
[1] Dept. of Electrical Engineering, Chungnam National University
[2] System Dynamics Research Laboratory, Korea Institute of Machinery and Materials
关键词
Energy harvester; Parallel-SSHI; Piezoelectric generator; Standard DC;
D O I
10.5370/KIEE.2017.66.7.1059
中图分类号
学科分类号
摘要
In this paper, the energy harvester with a piezoelectric materials is modeled as the electric equivalent circuit, and performances of a standard DC method and a Parallel-SSHI method are verified through experiment under variable force and load conditions. Piezoelectric generator consists of mass, damper and spring constant, and it is modeled by electrical equivalent circuit with components. Standard DC and Parallel-SSHI are used as power conversion methods, and standard DC consists of full-bridge rectifier and smoothing capacitor. Parallel-SSHI method is composed of L-C resonant circuit, zero-crossing detector and full-bridge rectifier. In case of simulation under 100kΩ load condition, the harvested power is 500μW in Standard DC and 670μW in Parallel-SSHI, respectively. In experiment, the harvested power under 100kΩ load condition is 420μW in standard DC and 602μW in Parallel-SSHI. Harvested power of Parallel-SSHI is improved by approximately 40% more than that of standard DC method. Copyright © The Korean Institute of Electrical Engineers.
引用
收藏
页码:1059 / 1065
页数:6
相关论文
共 50 条
  • [11] Piezoelectric Energy Harvester Design and Power Conditioning
    Kumar, Dhananjay
    Chaturvedi, Pradyumn
    Jejurikar, Nupur
    2014 IEEE STUDENTS' CONFERENCE ON ELECTRICAL, ELECTRONICS AND COMPUTER SCIENCE (SCEECS), 2014,
  • [12] Enhancing output power of a piezoelectric cantilever energy harvester using an oscillator
    Liu, Haili
    Huang, Zhenyu
    Xu, Tianzhu
    Chen, Dayue
    SMART MATERIALS AND STRUCTURES, 2012, 21 (06)
  • [13] Enhancement of Piezoelectric energy harvester power density using natural rubber
    Muhamad, Linasuriani
    Salleh, Hanim
    2014 IEEE 2ND INTERNATIONAL SYMPOSIUM ON TELECOMMUNICATION TECHNOLOGIES (ISTT), 2014, : 51 - 55
  • [14] Experimental study on power generation performances of a novel piezoelectric energy harvester
    Jia, Lihui
    Zhao, Qingling
    Luo, Lianjian
    Shen, Hui
    Song, Rujun
    FERROELECTRICS, 2023, 613 (01) : 79 - 88
  • [15] A miniature airflow energy harvester from piezoelectric materials
    Sun, H.
    Zhu, D.
    White, N. M.
    Beeby, S. P.
    13TH INTERNATIONAL CONFERENCE ON MICRO AND NANOTECHNOLOGY FOR POWER GENERATION AND ENERGY CONVERSION APPLICATIONS (POWERMEMS 2013), 2013, 476
  • [16] Evaluating Piezoelectric Materials for Power Conversion
    Boles, Jessica D.
    Acosta, Pedro L.
    Ramadass, Yogesh K.
    Lang, Jeffrey H.
    Perreault, David J.
    2020 IEEE 21ST WORKSHOP ON CONTROL AND MODELING FOR POWER ELECTRONICS (COMPEL), 2020, : 1282 - 1289
  • [17] Theoretical Investigation of Bistable Piezoelectric Energy Harvester Using Frequency Down-Conversion
    Abumarar, Hadeel
    Ibrahim, Alwathiqbellah
    Ramini, Abdallah
    ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS XVII, 2023, 12483
  • [18] Ensuring System Reliability of a Piezoelectric Energy Harvester
    Wittler, Olaf
    Hoelck, Ole
    Benecke, Stephan
    Dobs, Tom
    van Dijk, Marius
    Keller, Juergen
    Schulz, Marcus
    Bittner, Paul
    Schlosser, Ingolf
    Vergara, Francisco
    Yacoub, Talat
    Bader, Volker
    Braun, Tanja
    Lang, Klaus-Dieter
    2016 6TH ELECTRONIC SYSTEM-INTEGRATION TECHNOLOGY CONFERENCE (ESTC), 2016,
  • [19] Study on the energy conversion from the dynamic load of vehicles on the road using piezoelectric materials
    Lee, Jaeyun
    Lee, Moonkyu
    Oh, Jaegeun
    Kim, Kwangsoo
    ECO-MATERIALS PROCESSING AND DESIGN XI, 2010, 658 : 57 - +
  • [20] Design of Power Management ASIC for Piezoelectric Energy Harvester
    Yu, Hua
    Wu, Han
    2016 IEEE SENSORS, 2016,