Genetic Algorithm & Fuzzy Logic-based Condition Monitoring of Induction Motor Through Estimated Motor Losses

被引:5
|
作者
Ayyappan G.S. [1 ,2 ]
Babu B.R. [2 ,3 ]
Raghavan M.R. [1 ]
Poonthalir R. [1 ]
机构
[1] CSIR-Central Scientific Instruments Organisation (CSIR-CSIO), Chennai
[2] Academy of Scientific & Innovative Research, Ghaziabad
[3] CSIR-Central Electro Chemical Research Institute (CSIR-CECRI), Karaikudi
关键词
Condition monitoring; Equivalent circuit method; Fault diagnosis; Fuzzy logic; Genetic algorithm; IE & NEMA class; Induction motor; Loss distribution; Loss estimation; Performance monitoring;
D O I
10.1080/03772063.2021.1913075
中图分类号
学科分类号
摘要
In this paper, a novel approach for condition and performance monitoring of induction motor through estimated motor losses is proposed and explained. The novelty in the proposed approach is minimal non-intrusive measurements and does not require disconnection of motors from the load. In many systems, the losses measured directly or indirectly in a motor are of the lump sum in nature. The main advantage of the system prescribed in this paper gives losses in the segregated form, which is directly used to assess the internal condition of the motor. This approach will assess the condition of induction motors for internal faults such as stator faults, rotor faults, core faults, bearings faults, etc. The equivalent circuit parameters and motor losses are estimated using the developed Genetic Algorithm (GA). The estimated motor loss data are compared with the NEMA & IE Standards and if any deviation found will be reported as faults. The reported information is linked to the developed fuzzy algorithm to identify the faults exactly along with its severity level. The proposed approach was tested and evaluated with the help of LT motors ranging from 5 to 200 HP in real-time from a selected industry. © 2023 IETE.
引用
收藏
页码:3750 / 3761
页数:11
相关论文
共 50 条
  • [41] A fuzzy logic-based target tracking algorithm
    Quach, T
    Farooq, M
    APPLICATIONS AND SCIENCE OF COMPUTATIONAL INTELLIGENCE, 1998, 3390 : 476 - 487
  • [42] Genetic design of logic-based fuzzy controller
    Han, CW
    ELECTRONICS LETTERS, 2004, 40 (05) : 293 - 294
  • [43] Fuzzy logic-based loss minimisation scheme for brushless DC motor drive system
    Nag, Tridibesh
    Santra, Subhendu Bikash
    Chatterjee, Arunava
    Chatterjee, Debashis
    Ganguli, Ashoke K.
    IET POWER ELECTRONICS, 2016, 9 (08) : 1581 - 1589
  • [44] Optimization of Fuzzy Logic Based for Vector Control Induction Motor Drives
    Salleh, Zulhisyam
    Sulaiman, Marizan
    Omar, Rosli
    Patakor, Fizatul Aini
    2016 8TH COMPUTER SCIENCE AND ELECTRONIC ENGINEERING CONFERENCE (CEEC), 2016, : 83 - 88
  • [45] Fuzzy logic based improvements in efficiency optimization of induction motor drives
    Moreno, J
    Cipolla, M
    Peracaula, J
    Branco, PJD
    PROCEEDINGS OF THE SIXTH IEEE INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS, VOLS I - III, 1997, : 219 - 224
  • [46] dSPACE implementation of Fuzzy Logic based Vector Control of Induction Motor
    Subudhi, B.
    Kumar, Anish A. K.
    Jena, D.
    2008 IEEE REGION 10 CONFERENCE: TENCON 2008, VOLS 1-4, 2008, : 1686 - 1691
  • [47] A NEW APPROACH TO MOTOR CONDITION MONITORING IN INDUCTION-MOTOR DRIVES
    CHEN, ST
    ZHONG, EK
    LIPO, TA
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1994, 30 (04) : 905 - 911
  • [48] Maximum efficiency control strategy of induction motor based on fuzzy logic
    School of Electronics and Information Engineering, Dalian University of Technology, Dalian 116023, China
    Kongzhi yu Juece Control Decis, 2009, 5 (743-748): : 743 - 748
  • [49] DRFOC of Polyphase Induction Motor based on fuzzy logic controller speed
    Iffouzar, Koussaila
    Taraft, Saci
    Aouzellag, Haroune
    Ghedamsi, Kaci
    Aouzellag, Djamal
    2015 4TH INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING (ICEE), 2015, : 300 - +
  • [50] Induction Motor Condition Monitoring for Sustainable Manufacturing
    Zhang, Jianjing
    Wang, Peng
    Gao, Robert X.
    Sun, Chuang
    Yan, Ruqiang
    SUSTAINABLE MANUFACTURING FOR GLOBAL CIRCULAR ECONOMY, 2019, 33 : 802 - 809