Post-fire performance of hybrid GFRP-steel reinforced concrete columns

The fire safety requirements and knowledge on the use of Glass Fiber Reinforced Polymer (GFRP) bars as an alternative to conventional steel in reinforced concrete structures have been progressively evolving. This study investigates the post-fire axial performance of square GFRP reinforced concrete (RC) columns, addressing a significant gap in current knowledge. Five column specimens of the same cross-section and length were tested, where the main parameters considered are the clear cover depths (40, 50, and 65 mm) and the use of a 40-mm insulation on one column. The columns were subjected to a long 3-hour fire exposure per ASTM E119 standard without sustained loading. The columns were tested upon cooling under concentric axial loading. Despite the notable temperature differences between columns with 40 and 65 mm concrete cover (300 and 500 degrees C after 3 hours), the post-fire residual axial capacity appeared unaffected. This is primarily attributed to the minimal differences in the retained mechanical properties of GFRP bars at temperatures exceeding 200 degrees C. The study's findings indicate that GFRP longitudinal bars do not significantly influence the performance of columns in fires. Consequently, future research should focus on columns reinforced with GFRP ties as well. The predicted values of post-fire axial capacity closely match the experimental data for non-insulated columns, indicating a high degree of accuracy. The study provides design recommendations to enhance the fire performance of such elements. The use of insulation results in a substantial reduction of temperature at various depths of the column. Post-fire residual capacities for non-insulated columns were approximately 30 %, whereas insulated columns demonstrated a 60 % residual capacity.