Bearing capacity and settlement of footing resting on confined loose silty sands

被引:0
|
作者
Gupta, Rajeev [1 ]
Trivedi, Ashutosh [2 ]
机构
[1] Department of Civil Engineering, Thapar University, Patiala-147001, India
[2] Department of Civil Engineering, Delhi College of Engineering, Faculty of Technology, University of Delhi, Bawana Road, Delhi-110042, India
关键词
Cells; -; Soils; Cytology; Sand;
D O I
暂无
中图分类号
学科分类号
摘要
An experimental study on the influence of cell confinement on the bearing capacity and settlement of circular footing on silty sand was carried out. Laboratory experiments on clean sand and sand containing silt up to 25% were performed. Model cells with different diameters and heights have been used to confine the silty sand. The effect of the cell diameter, cell height and fines on bearing capacity and settlement were investigated with the help of an experimental programme using circular footing having a diameter of 0.15m. Initially, the response of a footing without confinement was determined and then compared with that of footing with confinement. The results indicate that the bearing capacity of circular footing decreases on the addition of fines and can be appreciably increased by soil confinement. The results also indicate that the settlement of circular footing can be appreciably decreased by soil confinement. It was interpreted that such confinement provides lateral displacement of soil underneath the footing. It leads to a significant improvement in the response of the footing. The cell-soil footing behaves as one unit for small cell diameters, while this pattern was no longer observed with large diameter cells. The recommended cell diameters that give the maximum ultimate bearing capacity improvement and less settlement are presented and discussed. © 2009 ejge.
引用
收藏
页码:1 / 17
相关论文
共 50 条
  • [31] Physical Modeling of the Effect of Using Scaled Geosynthetic Reinforcements on Bearing Capacity and Settlement of Strip Footing
    Majidi, Arman
    Yazdi, Maryam
    INTERNATIONAL JOURNAL OF GEOMECHANICS, 2023, 23 (07)
  • [32] Settlement and Bearing Capacity of Rectangular Footing in Reliance on the Pre-Overburden Pressure of Soil Foundation
    Ter-Martirosyan, Zaven G.
    Ter-Martirosyan, Armen Z.
    Dam, Huu H.
    APPLIED SCIENCES-BASEL, 2021, 11 (24):
  • [33] Effect of the shape of footing on bearing capacity
    Siddiquee, MSA
    Tatsuoka, F
    Tanaka, T
    FOURTEENTH INTERNATIONAL CONFERENCE ON SOIL MECHANICS AND FOUNDATION ENGINEERING, VOL 2, 1997, : 891 - 894
  • [34] Bearing Capacity of Circular Footing Resting on Recycled Construction Waste Materials using ANN Method
    Saini, Anant
    Yadav, Jitendra Singh
    JOURNAL OF MINING AND ENVIRONMENT, 2024, 15 (01): : 97 - 114
  • [35] A CEL study of bearing capacity and failure mechanism of strip footing resting on c-φ soils
    Chen, Yang
    Zhao, Wen
    Han, Jianyong
    Jia, Pengjiao
    COMPUTERS AND GEOTECHNICS, 2019, 111 : 126 - 136
  • [36] THREE-DIMENSIONAL BEARING CAPACITY ENVELOPES FOR A CIRCULAR FOOTING RESTING ON SAND OVER CLAY
    Poirriez, Catherine
    Edwards, David H.
    PROCEEDINGS OF THE 5TH INTERNATIONAL YOUNG GEOTECHNICAL ENGINEERS' CONFERENCE (IYGEC 2013), 2013, 2 : 209 - 212
  • [37] Application of MGGP in Predicting Bearing Capacity of a Strip Footing Resting on the Crest of a Marginal Soil Hillslope
    Acharyya, Rana
    Dey, Arindam
    KSCE JOURNAL OF CIVIL ENGINEERING, 2024, 28 (10) : 4244 - 4257
  • [38] Load-settlement behaviour of footing on laterally confined soil
    Potty, P. S. Sreedhu
    Jeenu, Mayuna
    Raj, Anjana
    Krishna, R. S.
    Rose, J. B. Ralphin
    Varsha, T. S. Amritha
    Jayamohan, J.
    Chandran, R. Deepthi
    EMERGING TRENDS IN ENGINEERING, SCIENCE AND TECHNOLOGY FOR SOCIETY, ENERGY AND ENVIRONMENT, 2018, : 293 - 298
  • [39] UNCERTAINTY IN BEARING CAPACITY OF SANDS
    INGRA, TS
    BAECHER, GB
    JOURNAL OF GEOTECHNICAL ENGINEERING-ASCE, 1983, 109 (07): : 899 - 914
  • [40] Ultimate bearing capacity of a footing considering the interference of an existing footing on sand
    Kouzer K.M.
    Kumar J.
    Geotechnical and Geological Engineering, 2010, 28 (04) : 457 - 470