Research progress on key materials of phosphoric acid doped high-temperature proton exchange membrane fuel cells

被引：0

作者：

Xiang Y. ^{[1
]}

Li W. ^{[1
]}

Guo Z. ^{[2
]}

Zhang J. ^{[1
]}

Lu S. ^{[1
]}

机构：

[1] School of Space and Environment, Beihang University, Beijing

[2] Beijing Heracles Novel Technology Co., Ltd., Beijing

来源：

Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics | 2022年 / 48卷 / 09期

关键词：

catalytic layer; fuel cell; high-temperature fuel cell stack; high-temperature proton exchange membrane; membrane electrode;

D O I：

10.13700/j.bh.1001-5965.2022.0575

中图分类号：

学科分类号：

摘要：

High-temperature proton exchange membrane fuel cells (HT-PEMFC) has fast electrode reaction kinetics, strong resistance to fuel / air impurity poisoning, a wide range of fuel sources (pure hydrogen, methanol-reforming gas, formic acid, etc.), and simple water / thermal management systems due to their high operating temperature (130℃ - 200℃) . They have become one of the important development directions of polymer membrane fuel cells. This paper mainly introduces the research progress of Beihang University in HT-PEMFC key materials-high-temperature membrane, catalytic layer, and membrane electrode assemblies in recent ten years. Aiming at the best balance between proton conductivity and mechanical properties of phosphoric acid (PA) doped high-temperature membrane, the influence mechanism of PA distribution and migration in the catalytic layer on cell performance, and the influence and attenuation mechanism of large-size membrane electrode consistency on stack performance. The molecular design of polyelectrolyte membrane materials, the regulation of ordered catalytic layer structure, and the optimization of large-size membrane electrode stack were reviewed, and the technical challenges faced by HT-PEMFC technology as well as the future development trend are reviewed and prospected. © 2022 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.

引用

页码：1791 / 1805

页数：14

共 67 条

[51] SCHUSTER M, RAGER T, NODA A, Et al., About the choice of the protogenic group in PEM separator materials for intermediate temperature, low humidity operation:A critical comparison of sulfonic acid,phosphonic acid and imidazole functionalized model compounds[J], Fuel Cells, 5, 3, pp. 355-365, (2005)
[52] RAGER T, SCHUSTER M, STEININGER H, Et al., Poly(1,3phenylene-5-phosphonic acid), a fully aromatic polyelectrolyte with high ion exchange capacity [ J ], Advanced Materials, 19, 20, pp. 3317-3321, (2007)
[53] NAGAO M, TAKEUCHI A, HEO P, Et al., A proton-conducting In3 + -doped SnP2 O7 electrolyte for intermediate-temperature fuel cells [J], Electrochemical and Solid-State Letters, 9, 3, pp. 105-109, (2006)
[54] WU X, VERMA A, SCOTT K., A Sb-doped SnP2 O7 solid proton conductor for intermediate temperature fuel cells [J], Fuel Cells, 8, 6, pp. 453-458, (2008)
[55] FORAN G Y, GOWARD G R., Site-specific proton dynamics in indium-doped tin pyrophosphate [J], The Journal of Physical Chemistry C, 124, 52, pp. 28407-28416, (2020)
[56] KANNAN A, LI Q F, CLEEMANN L N, Et al., Acid distribution and durability of HT-PEM fuel cells with different electrode supports[J], Fuel Cells, 18, 2, pp. 103-112, (2018)
[57] BECKER H, REIMER U, AILI D, Et al., Determination of anion transference number and phosphoric acid diffusion coefficient in high temperature polymer electrolyte membranes[J], Journal of the Electrochemical Society, 165, 10, pp. 863-869, (2018)
[58] BECKER H, CLEEMANN L N, AILI D, Et al., Probing phosphoric acid redistribution and anion migration in polybenzimidazole membranes[J], Electrochemistry Communications, 82, pp. 21-24, (2017)
[59] MARTIN S, LI Q, STEENBERG T, Et al., Binderless electrodes for high-temperature polymer electrolyte membrane fuel cells [J], Journal of Power Sources, 272, pp. 559-566, (2014)
[60] LEE E, KIM D H, PAK C., Effects of cathode catalyst layer fabrication parameters on the performance of high-temperature polymer electrolyte membrane fuel cells[J], Applied Surface Science, 510, (2020)

← 1 2 3 4 5 6 7 →