Design and experiment of vertical circular separating and conveying device for potato combine harvester

被引:0
|
作者
Yang R. [1 ,2 ]
Yang H. [1 ]
Shang S. [1 ,2 ]
Ni Z. [1 ]
Liu Z. [1 ]
Guo D. [1 ]
机构
[1] College of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao
[2] Shandong Provincial Engineering Technology Research Center for Root Crops Production Equipment, Qingdao
来源
Shang, Shuqi (sqshang@qau.edu.cn) | 2018年 / Chinese Society of Agricultural Engineering卷 / 34期
关键词
Damage rate; Design; Experiment; Impurity rate; Mechanization; Optimization; Potato combine harvester; Separating and conveying device;
D O I
10.11975/j.issn.1002-6819.2018.03.002
中图分类号
学科分类号
摘要
To solve the problems of the separating and conveying device for the potato combine harvester, such as poor separation and inflexibility of manipulation, a vertical circular separating and conveying device was designed. The structure and working parameters of key components of the separating and conveying device were determined by research analysis. Quadratic general rotation-combination experiments were carried out with the moving forward speed, the linear speed of the transverse transfer belt and the rotational speed of the circular orbit as experimental factors, damage rate and impurity rate as experimental index. The mathematical model of the relationship between the experimental factors and the experimental index were established and the parameters were optimized using DPS (data processing system) and Matlab (matrix laboratory) software. The results showed that the influences on the damage rate of the respective factors decrease in the order as below, the rotational speed of the circular orbit, the linear speed of the transverse transfer belt and the moving forward speed, the influences on the impurity rate of the respective factors decrease in the order as below, the rotational speed of the circular orbit, the moving forward speed and the linear speed of the transverse transfer belt. And the moving forward speed of 1.1 m/s, the linear speed of the transverse transfer belt of 1.5 m/s and the rotational speed of the circular orbit of 7 r/min were the best combination factors, which leaded to the damage rate of 1.28%, the impurity rate of 2.41%. Verification experiment results showed that the average damage rate of 1.46% and the average impurity rate of 2.57%, under the condition of optimal parameters, the theoretical value is similar to the test value, and its meet the relevant requirements of the potato combine harvest. This research can provide a technical basis and reference for the development of a new separating and conveying device and potato combine harvester. © 2018, Editorial Department of the Transactions of the Chinese Society of Agricultural Engineering. All right reserved.
引用
收藏
页码:10 / 18
页数:8
相关论文
共 50 条
  • [31] Design and Experiment of Spiral Interlaced Threshing Cylinder for Combine Harvester
    Jiang, Tao
    Li, Haitong
    Huang, Minghui
    Zhang, Min
    Jin, Mei
    Guan, Zhuohuai
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2025, 56 (02): : 314 - 324
  • [32] Design and Experiment on Coaxial Double Speed Threshing for Combine Harvester
    Tian L.
    Li H.
    Hu H.
    Chen L.
    Xiong Y.
    Jin R.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2020, 51 : 139 - 146
  • [33] A Feeding Quantity Monitoring System for a Combine Harvester: Design and Experiment
    Jiang, Tao
    Guan, Zhuohuai
    Li, Haitong
    Mu, Senlin
    Wu, Chongyou
    Zhang, Min
    Wang, Gang
    Chen, Xu
    AGRICULTURE-BASEL, 2022, 12 (02):
  • [34] Design and Experiment of Special Header of Oil Sunflower Combine Harvester
    Liu W.
    Huang X.
    Ma L.
    Zong W.
    Zhu Y.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2020, 51 (08): : 83 - 88and135
  • [35] Design and Experiment of On-line Detection Device for Capacitive Paddy Rice Moisture Content of Combine Harvester
    Wang, Jinwu
    Tang, Tianyong
    Tang, Han
    Xu, Changsu
    Zhou, Wenqi
    Wang, Qi
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2021, 52 (03): : 143 - 152
  • [36] Design and Test of Straw Coating Device for Peanut Combine Harvester
    Yang R.
    Wang Z.
    Shang S.
    Chen M.
    Wang J.
    Wang Z.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2020, 51 (08): : 109 - 117
  • [37] Design and Test of Floating Clamping Device for Garlic Combine Harvester
    Hou J.
    Li C.
    Lou W.
    Zhou K.
    Li Y.
    Li T.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2023, 54 (01): : 137 - 145
  • [38] Design and Experiment of Peanut Pod-picking and Conveying Device of Multistage Tangential Flow Type Peanut Combine
    Xu H.
    Zhang P.
    Zhang Y.
    Wang S.
    Yu Z.
    Gu F.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2023, 54 : 52 - 60
  • [39] Study on the Process of Soil Clod Removal and Potato Damage in the Front Harvesting Device of Potato Combine Harvester
    Li, Zewen
    Sun, Wei
    Wang, Hucun
    Wang, Juanling
    Simionescu, Petru A.
    AGRICULTURE-BASEL, 2024, 14 (11):
  • [40] Simulation and Optimization Experiment: Working Process of a Cleaning Device for Flax Combine Harvester
    Dai, Fei
    Xu, Pengqing
    Yuan, Zixiang
    Shi, Ruijie
    Zhao, Yiming
    Song, Xuefeng
    Zhao, Wuyun
    AGRICULTURE-BASEL, 2023, 13 (11):