High-temperature stability of SiO2 oxide film on surface of SiC

被引:0
|
作者
Yamaguchi S. [1 ]
Yusufu A. [1 ]
Shirahama T. [1 ]
Murakami Y. [1 ]
Onitsuka T. [1 ]
Uno M. [1 ]
机构
[1] University of Fukui, 1-2-4 Kanawa-cho, Tsuruga-shi, Fukui
关键词
Accident tolerant fuel; Cracking; High temperature; Microstructure; Oxidation; Oxide film; Porous structure; Silicon carbide; Thermodynamics;
D O I
10.3327/taesj.J18.044
中图分类号
学科分类号
摘要
SiC, which is a promising accident-tolerant fuel cladding, is a non-oxide, and it is known that passive oxidation occurs, where by a protective oxide film of SiO2 is formed under atmospheric conditions above 900°C. The reaction occurring at this high temperature is important in assessing the soundness of SiC during a severe accident, but the understanding of it is still insufficient. In this study, to evaluate the high-temperature oxidation behavior when SiC cladding is exposed to the atmosphere( 105 Pa) during an accident involving a light-water reactor, an oxidation test was performed for up to 100 h at 1100 to 1500°C. As a result, a SiO2 oxide film was formed on the surface of SiC, but the formation of bubbles originating from impurities and cracks due to a phase transformation was confirmed. In addition, it was observed, for the first time in this research, that a multilayered SiO2 oxide film was formed at 1500°C. Therefore, it was shown that the oxidation reaction of SiC does not stop depending on the surrounding conditions under high temperature and atmospheric conditions. © 2019 Atomic Energy Society of Japan, All Rights Reserved.
引用
收藏
页码:219 / 225
页数:6
相关论文
共 50 条
  • [41] Separation of SiO2 Films from the Surface of Silicon Nanofibers Using a High-Temperature Vacuum Installation
    Isakov, A. V.
    Laptev, M. V.
    Khudorozhkova, A. O.
    Shmygalev, A. S.
    Apisarov, A. P.
    RUSSIAN METALLURGY, 2023, 2023 (02): : 173 - 177
  • [42] Preparation of porous SiO2 monoliths with high porosity and high temperature stability
    Zhang Lijie
    Gu Jinghua
    Yao Hongying
    Zhang Yue
    RARE METALS, 2011, 30 : 552 - 556
  • [43] Thermal stability of hexaaluminate film coated on SiC substrate for high-temperature catalytic application
    Inoue, H
    Sekizawa, K
    Eguchi, K
    Arai, H
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1997, 80 (03) : 584 - 588
  • [44] Preparation of porous SiO2 monoliths with high porosity and high temperature stability
    Lijie Zhang
    Jinghua Gu
    Hongying Yao
    Yue Zhang
    Rare Metals, 2011, 30 : 552 - 556
  • [45] Chemical mechanical polishing (CMP) mechanisms of thermal SiO2 film after high-temperature pad conditioning
    Kim, NH
    Ko, PJ
    Choi, GW
    Seo, YJ
    Lee, WS
    THIN SOLID FILMS, 2006, 504 (1-2) : 166 - 169
  • [46] Effect of Post-Oxidation Annealing on High-Temperature Grown SiO2/4H-SiC Interface
    Moon, Jeong Hyun
    Cheong, Kuan Yew
    Song, Ho Keun
    Yiml, Jeong Hyuk
    Oh, Myeong Sook
    Lee, Jong Ho
    Bahng, Wook
    Kim, Nam-Kyun
    Kim, Hyeong Joon
    SILICON CARBIDE AND RELATED MATERIALS 2007, PTS 1 AND 2, 2009, 600-603 : 731 - +
  • [47] SiC – Si3N4 – SiO2 high-temperature coatings for metal fiber sealing materials
    S. S. Solntsev
    V. A. Rozenenkova
    N. A. Mironova
    S. V. Gavrilov
    Glass and Ceramics, 2011, 68
  • [48] Degradation of SiO2/SiC interface properties due to mobile ions intrinsically generated by high-temperature hydrogen annealing
    Chanthaphan, Atthawut
    Hosoi, Takuji
    Nakano, Yuki
    Nakamura, Takashi
    Shimura, Takayoshi
    Watanabe, Heiji
    SILICON CARBIDE AND RELATED MATERIALS 2013, PTS 1 AND 2, 2014, 778-780 : 541 - +
  • [49] Mechanism for crystalline Si surface passivation by the combination of SiO2 tunnel oxide and μc-SiC:H thin film
    Ding, Kaining
    Pomaska, Manuel
    Singh, Aryak
    Lentz, Florian
    Finger, Friedhelm
    Rau, Uwe
    PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS, 2016, 10 (03): : 233 - 236
  • [50] Synthesis and high-temperature stability of Ti3SiC2
    Radhakrishnan, R
    Williams, JJ
    Akinc, M
    JOURNAL OF ALLOYS AND COMPOUNDS, 1999, 285 (1-2) : 85 - 88