Preparation and performance of ultrafine Ag-Cu immiscible alloy powder

被引:0
|
作者
College of Materials Science and Engineering, Shenzhen University, Shenzhen, China [1 ]
不详 [2 ]
不详 [3 ]
不详 [4 ]
机构
来源
Cailiao Rechuli Xuebao | / 8卷 / 17-21期
关键词
Antibacterial properties - Conductive adhesive - Electrical conductivity - Hydrazine hydrate - Immiscible alloys - Particle diameters - Reaction temperature - Thermogravimetric analyzers;
D O I
暂无
中图分类号
学科分类号
摘要
The mixed liquor of AgNO3 and CuSO4 was reduced by ascorbic acid or hydrazine hydrate. By changing the concentration, proportion and reaction temperature, the ultrafine Ag-Cu immiscible alloy powder was prepared successfully. The alloy powders were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermogravimetric analyzer (TG). The alloy powder was used for the preparation of conductive adhesive and its electrical properties were tested. The antibacterial experiments were also carried out. The results show that immiscible alloy powders which is reduced by ascorbic acid and hydrazine hydrate have particle diameters of 463-871 nm and 25.9-63.5 nm, respectively. The alloy powder which is reduced by ascorbic acid has stronger resistance to oxidation and better electrical conductivity, meanwhile the alloy powder which is reduced by hydrazine hydrate has stronger antibacterial property. ©, 2015, Editorial Office of Transactions of Materials and Heat Treatment. All right reserved.
引用
收藏
相关论文
共 50 条
  • [41] The effect of annealing to surface quality of Ag-Cu 750/1000 alloy
    Imris, I
    Bursák, M
    Klenovcanová, A
    METALURGIJA, 2000, 39 (01): : 3 - 8
  • [42] Kinetics of structural evolution in immiscible Ag-Cu and Co-Cu systems under mechanical processing conditions
    Delogu, F
    Cocco, G
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 402 (1-2): : 208 - 214
  • [43] Synthesis of Ag-Cu alloy particles using hyperbranched polyester as a template
    Shaanxi University of Technology, Hanzhong
    723003, China
    Xiyou Jinshu Cailiao Yu Gongcheng, 9 (2280-2284):
  • [44] Effect of high temperature oxidation on dealloying mechanism of Ag-Cu alloy
    Zhao, Zi J.
    Li, Wan P.
    Chen, Yen H.
    Liu, Xin Y.
    Chou, Tzu H.
    Wang, Xu
    Huang, J. C.
    Wu, Ming
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 896
  • [45] Effect Of Polyvinyl Alcohol (PVA) on Ag-Cu Nanopaste Performance
    Noordin, Norasiah Mohammad
    Abd Razak, Khairunisak
    Cheong, Kuan Yew
    PROCEEDING OF THE 3RD INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY 2016 (3RD IGNITE-2016): ADVANCED MATERIALS FOR INNOVATIVE TECHNOLOGIES, 2017, 1865
  • [46] Joining of CBN abrasive grains to medium carbon steel with Ag-Cu/Ti powder mixture as active brazing alloy
    Ding, W. F.
    Xu, J. H.
    Shen, M.
    Su, H. H.
    Fu, Y. C.
    Xiao, B.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 430 (1-2): : 301 - 306
  • [47] Synthesis of Ag-Cu Alloy Particles Using Hyperbranched Polyester as a Template
    Han Wensong
    RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (09) : 2280 - 2284
  • [48] Phase transformation of Ag-Cu alloy nanoparticle embedded in Ni matrix
    Tiwari, Khushubo
    Paliwal, Manas
    Biwas, Krishanu
    JOURNAL OF MATERIALS RESEARCH, 2022, 37 (23) : 4124 - 4139
  • [49] SOLUBILITY OF OXYGEN IN SILVER + THERMODYNAMICS OF INTERNAL OXIDATION OF AG-CU ALLOY
    PODGURSKI, HH
    DAVIS, FN
    JOM-JOURNAL OF METALS, 1964, 16 (01): : 92 - &
  • [50] Microwave assisted low temperature encapsulation of Ag films by Cu reactions using Ag-Cu alloy structures
    Das, Sayantan
    Alford, T. L.
    MATERIALS LETTERS, 2012, 89 : 163 - 165