Free vibration analysis of curvilinearly stiffened Kirchhoff-Mindlin plates

被引：0
|
作者：
Liu J. [1 ,2 ]
Jiang D. [2 ,3 ]
Han X. [1 ]
Fei Q. [2 ]
机构：
[1] Department of Engineering Mechanics, Southeast University, Nanjing
[2] Institute of Aerospace Machinery and Dynamics, Southeast University, Nanjing
[3] College of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing
来源：
Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics | 2017年 / 49卷 / 04期
关键词：
Curvilinearly stiffener; Free vibration analysis; Kirchhoff-Mindlin plate;
D O I：
10.6052/0459-1879-17-041
中图分类号：
学科分类号：
摘要：
Compared with traditional stiffened plates, curvilinearly stiffened plates can deliver the mechanical properties of materials more adequately. In mechanical analysis of stiffened thick plates, Reissner-Mindlin theory is usually adopted. However, difficulties are encountered in connection with shear locking when the plate thickness approaches zero. In order to avoid the above problem, the discrete Kirchhoff-Mindlin theory was investigated by employing the assumption of shear strain field. An efficient finite element approach for free vibration analysis of curvlinearly stiffened Kirchhoff-Mindlin plates is presented in this paper. The discrete Kirchhoff-Mindlin triangular (DKMT) element and the Timoshenko curved beam element are employed for modeling the plate and the stiffeners, respectively. The finite element equation is established through the displacement interpolation function of plate and the displacement compatibility conditions at the plate-stiffener interfaces. In order to verify the efficiency and accuracy of the present method, linearly stiffened thin plate and curvilinearly stiffened thin and thick plates are used as numerical examples. The reasonable finite element mesh density is selected by convergence and accuracy analysis. The first 20 natural frequencies of the linearly stiffened plate are in good agreement with the literature. In the examples of the curvilinearly stiffened plate, the number of plate elements satisfying the convergence condition is 2469, while the number in Nastran model is 6243. The maximum error of the natural frequency between the present method and Nastran is 3.4%. Results show that present approach can guarantee the accuracy of calculation with less number of elements. The present method can be applied to the free vibration analysis of both stiffened thin and thick plates. © 2017, Editorial Office of Chinese Journal of Theoretical and Applied Mechanics. All right reserved.
引用
收藏
页码：929 / 939
页数：10
相关论文
共 31 条
  • [21] Barik M., Mukhopadhyay M., A new stiffened plate element for the analysis of arbitrary plates, Thin-Walled Structures, 40, 7, pp. 625-639, (2002)
  • [22] Mukhopadhyay M., Mukherjee A., Finite element buckling analysis of stiffened plates, Computers & Structures, 34, 6, pp. 795-803, (1990)
  • [23] Holopainen T.P., Finite element free vibration analysis of eccentrically stiffened plates, Computers & Structures, 56, 6, pp. 993-1007, (1995)
  • [24] Nguyen-Thoi T., Bui-Xuan T., Phung-Van P., Et al., Static, free vibration and buckling analyses of stiffened plates by CS-FEM-DSG3 using triangular elements, Computers & Structures, 125, pp. 100-113, (2013)
  • [25] Zhang X., Wang A., Geometrically nonlinear plate element for arbitrarily stiffened laminated composite plates, Engineering Mechanics, 18, 3, pp. 131-135, (2001)
  • [26] Zhang X., Wang A., Mei Y., A large deformation shell element for eccentrically arbitrary stiffened composite shells, Engineering Mechanics, 20, 5, pp. 134-138, (2003)
  • [27] Zhang Z., Chen H., Bai R., A new triangular stiffened plate/shell element for composite grid structure analysis, Engineering Mechanics, 23, A01, pp. 203-208, (2006)
  • [28] Katili I., A new discrete Kirchhoff-Mindlin element based on Mindlin-Reissner plate theory and assumed shear strain fields-part I: An extended DKT element for thick-plate bending analysis, International Journal for Numerical Methods in Engineering, 36, 11, pp. 1859-1883, (1993)
  • [29] Persson P.O., Strang G., A simple mesh generator in MATLAB, SIAM Review, 46, 2, pp. 329-345, (2004)
  • [30] Katili I., Maknun I.J., Hamdouni A., Et al., Application of DKMQ element for composite plate bending structures, Composite Structures, 132, pp. 166-174, (2015)
1234