Modeling and Simulation of Dynamic Behavior of Large Spray Boom with Active and Passive Pendulum Suspension

被引:0
|
作者
Cui L. [1 ,2 ]
Xue X. [1 ]
Ding S. [1 ]
Gu W. [1 ]
Chen C. [1 ]
Le F. [1 ]
机构
[1] Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture, Nanjing
[2] Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu University, Zhenjiang
来源
Xue, Xinyu (735178312@qq.com) | 1600年 / Chinese Society of Agricultural Machinery卷 / 48期
关键词
Boom sprayer; Dynamic analysis; Experiment; Simulation; Suspension;
D O I
10.6041/j.issn.1000-1298.2017.02.011
中图分类号
学科分类号
摘要
When sprayer works in the field, boom movement seriously affected the spray distribution, suspension system is the key device to control the dynamic behavior of boom. The response of a boom suspension should be such that it isolates the boom from high frequency roll of vehicle as it travels over bumpy ground, while transmitting low frequency roll so that the boom can follow undulating and sloping ground. In order to solve the dynamics and control problems of double pendulum active and passive suspension mechanism, considering the coupling effect of vehicle body motion, change of terrain slope, friction of moving pair, etc., a higher order differential equation group was established to describe the dynamic behavior of boom by using the second kinds of Lagrange dynamics equation. Based on this, the dynamic characteristics of the passive suspension were studied, and the effects of these factors, such as damping, friction and pendulum length on the response characteristics were analyzed. A Matlab/Simulink simulation model of active suspension based on hydraulic proportional control was established, and then the influence of gain coefficient, time constant and suspension structure parameters on the boom response and tracking error was revealed. By using Stewart six degree of freedom motion simulation platform and dynamic testing system, step response test and frequency response test were conducted on a spray boom with pendulum suspension, the root mean square error between frequency response test value and the mathematical model predictive value was 0.087. It was demonstrated that the model could be used in the design of a suspension to give a specified response to the rolling motion of the spray vehicle, and the results showed that the model can be used to predict the dynamic response characteristics of the boom, and guide the design of large boom suspension. © 2017, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码:82 / 90
页数:8
相关论文
共 20 条
  • [11] Marchant J.A., Frost A.R., Simulation of the performance of state feedback controllers for an active spray boom suspension, Journal of Agricultural Engineering Research, 43, 43, pp. 77-91, (1989)
  • [12] Deprez K., Anthonis J., Ramon H., Et al., Development of a Slow active suspension for stabilizing the roll of spray booms, part 1: hybrid modelling, Biosystems Engineering, 81, 2, pp. 185-191, (2002)
  • [13] Deprez K., Anthonis J., Ramon H., Et al., PM-Power and machinery: development of a slow active suspension for stabilizing the roll of spray booms, part 2: controller design, Biosystems Engineering, 81, 3, pp. 273-279, (2002)
  • [14] Tahmasebi M., Rahman R.A., Mailah M., Et al., Roll movement control of a spray boom structure using active force control with artificial neural network strategy, Journal of Low Frequency Noise, Vibration & Active Control, 32, 3, pp. 189-202, (2013)
  • [15] Tahmasebi M., Rahman R.A., Mailah M., Et al., Active force control applied to spray boom structure, Applied Mechanics & Materials, 315, pp. 616-620, (2013)
  • [16] Wang S., Zhao C., Wang X., Design and experiments on boom height adjusting system, Journal of Agricultural Mechanization Research, 8, pp. 161-164, (2014)
  • [17] Chen W., Qiu B., Yang N., Et al., Spray boom position control system based on ultrasonic sensors, Journal of Agricultural Mechanization Research, 35, 3, pp. 84-87, (2013)
  • [18] Wei X., Shao J., Miao D., Et al., Online control system of spray boom height and balance, Transactions of the Chinese Society for Agricultural Machinery, 46, 8, pp. 66-71, (2015)
  • [19] O'Sullivan J.A., Verification of passive and active versions of a mathematical model of a pendulum spray boom suspension, Journal of Agricultural Engineering Research, 40, 2, pp. 89-101, (1988)
  • [20] Anthonis J., Audenaert J., Ramon H., Design optimization for the vertical suspension of a crop sprayer boom, Biosystems Engineering, 90, 2, pp. 153-160, (2005)