Kinetostatic analysis of a new type of oscillating tooth indexing cam mechanism

被引：0

作者：

Shen, Yu ^{[1
]}

Yang, Yu-Hu ^{[1
]}

Zhang, Da-Wei ^{[1
]}

Liu, Ze-Fu ^{[1
]}

机构：

[1] School of Mechanical Engineering, Tianjin University, Tianjin 300072, China

来源：

Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology | 2008年 / 41卷 / 08期

关键词：

Speed - Indexing (of information) - MATLAB;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Since the indexing speed of indexing mechanism fails to meet the higher requirements, a new type of indexing mechanism with the same axle and rotating speed of input/output was presented, the structure of which was borrowed from that of oscillating tooth of planetary gear transmission system. The ejector pins of the mechanism are symmetric, which is suitable for high-speed indexing transmission. The equations of the cam's pitch curve was deduced according to the formative principle of conjugate tooth contour. And then considering the inertia force, the dynamic model was established. With MATLAB programming, kinetostatic analysis of the mechanism was carried out to study the influence of parameters on acting force. The results provide theoretical basis for creative design of high-speed indexing mechanism, as well as reference for optimization of such high-speed indexing mechanism.

引用

页码：972 / 977

共 50 条

[41] Design of oscillating flat-face cam mechanism with constant-width cam
Lin, Shou-feng
Ye, Zhong-he
Tang, Xiao-teng
Jixie Kexue Yu Jishu/Mechanical Science and Technology, 2000, 19 (02): : 256 - 258
[42] Kinetostatic Analysis and Solution Classification of a Planar Tensegrity Mechanism
Wenger, P.
Chablat, D.
COMPUTATIONAL KINEMATICS, 2018, 50 : 422 - 431
[43] Design and kinetostatic analysis of a new parallel manipulator
Zhang, Dan
Bi, Zhuming
Li, Beizhi
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2009, 25 (4-5) : 782 - 791
[44] Dynamics model of a cam mechanism with an elastic oscillating roller follower
Hu, Bo
Zhou, Changjiang
Ma, Lin
PROCEEDINGS OF THE FOURTEENTH INTERNATIONAL FEDERATION FOR THE PROMOTION OF MECHANISM AND MACHINE SCIENCE WORLD CONGRESS, 2015, : 104 - 108
[45] Discussion on pressure angle of plate cam mechanism with oscillating follower
Yang, Wei
Jixie Kexue Yu Jishu/Mechanical Science and Technology, 1999, 18 (01): : 78 - 79
[46] Load distribution measurement instrument for oscillating follower cam mechanism
Ming, Shi-lin
Wang, Jun-feng
Cai, Zhen-bing
Li, Zheng-yang
Wang, Xiao-guang
Jing, Jian-ying
Zhou, Zhong-rong
REVIEW OF SCIENTIFIC INSTRUMENTS, 2019, 90 (04):
[47] Design of minimum size oscillating follower translating cam mechanism
Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2000, 32 (02): : 52 - 55
[48] KINETOSTATIC ANALYSIS OF THE MECHANISM OF DEEP LOOSENING SYSTEM OF ARABLE SOIL
Vladut, V.
Gheorghe, G.
Marin, E.
St Biris, S.
Paraschiv, G.
Cujbescu, D.
Ungureanu, N.
Gageanu, I.
Moise, V.
Boruz, S.
ACTUAL TASKS ON AGRICULTURAL ENGINEERING, 2017, 45 : 217 - 227
[49] Design and analysis of constant-breadth cam mechanism with oscillating flat-faced follower
Hsieh J.-F.
Hsieh, Jung-Fa (seznof@cc.feu.edu.tw), 1600, Canadian Society for Mechanical Engineering, Building M-55, 3rd Floor, Ottawa Ont., K1A 0R6, Canada (41): : 211 - 225
[50] DESIGN AND ANALYSIS OF CONSTANT-BREADTH CAM MECHANISM WITH OSCILLATING FLAT-FACED FOLLOWER
Hsieh, Jung-Fa
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2017, 41 (02) : 211 - 225

← 1 2 3 4 5 →