Study of pressure balance for press-pack IGBTs and its influence on temperature distribution

被引：3
|
作者：
Zhao Z. [1 ,2 ]
Liang L. [1 ]
Han L. [1 ]
机构：
[1] State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan
[2] School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan
来源：
Chinese Journal of Electrical Engineering | 2018年 / 4卷 / 04期
关键词：
Press-Pack IGBT; Pressure balance; Temperature distribution; Thermal resistance;
D O I：
10.23919/CJEE.2018.8606790
中图分类号：
学科分类号：
摘要：
Pressure balance is a key technology for Press-Pack IGBT packaging, and is studied in this paper with its influence on the temperature distribution discussed in further when the device is turned on. By establishing the physical model of the Press-Pack IGBT device in the finite element simulation software, the influence of the internal flatness condition on the pressure balance is analyzed, and the variation of the average pressure difference with the flatness in different parallel scale of the chips is obtained. The thermal contact resistance and the electrical contact resistance parameters, which are dependent on the pressure, are then imported to perform the multi-field coupling, further investigating the effect of different pressure distributions on temperature distribution. The junction-case thermal resistance of the device with different flatness is compared experimentally. The results have demonstrated the influence of the flatness on the thermal resistance of the Press-Pack IGBT device. © 2018 IEEE. All rights reserved.
引用
收藏
页码：57 / 63
页数：6
相关论文
共 50 条
  • [1] Influence of Temperature on the Pressure Distribution Within Press Pack IGBTs
    Deng, Erping
    Zhao, Zhibin
    Lin, Zhongkang
    Han, Ronggang
    Huang, Yongzhang
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2018, 33 (07) : 6048 - 6059
  • [2] Influence of the clamping pressure on the electrical, thermal and mechanical behaviour of press-pack IGBTs
    Poller, T.
    D'Arco, S.
    Hernes, M.
    Ardal, A. Rygg
    Lutz, J.
    MICROELECTRONICS RELIABILITY, 2013, 53 (9-11) : 1755 - 1759
  • [3] Mechanical analysis of press-pack IGBTs
    Poller, T.
    Basler, T.
    Hernes, M.
    D'Arco, S.
    Lutz, J.
    MICROELECTRONICS RELIABILITY, 2012, 52 (9-10) : 2397 - 2402
  • [4] Calibration Method of Junction Temperature Measurement for Press-Pack IGBTs
    Chen, Jie
    Deng, Erping
    Zhang, Yiming
    Huang, Yongzhang
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2021, 11 (07): : 1063 - 1072
  • [5] Press-pack IGBTs for HVDC and FACTS
    Simpson, Robin
    Plumpton, Ashley
    Varley, Michael
    Tonner, Charles
    Taylor, Paul
    Dai, Xiaoping
    CSEE JOURNAL OF POWER AND ENERGY SYSTEMS, 2017, 3 (03): : 302 - 310
  • [6] Electric Field Analysis of Press-Pack IGBTs
    Tang, Xinling
    Pan, Yan
    Chen, Yanfang
    Fu, Pengyu
    Zhao, Zhibin
    2018 3RD INTERNATIONAL CONFERENCE ON POWER AND RENEWABLE ENERGY (ICPRE), 2018, 64
  • [7] Application of press-pack IGBTs in traction refurbishment
    Golland, A
    Wakeman, F
    APEC 2005: TWENTIETH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1-3, 2005, : 2030 - 2035
  • [8] Electrical Field Analysis of press-pack IGBTs
    Fu, Pengyu
    Zhao, Zhibin
    Cui, Xiang
    Zhang, Peng
    Han, Ronggang
    2017 IEEE SIXTH ASIA-PACIFIC CONFERENCE ON ANTENNAS AND PROPAGATION (APCAP), 2017,
  • [9] Possible failure modes in Press-Pack IGBTs
    Tinschert, Lukas
    Ardal, Atle Rygg
    Poller, Tilo
    Bohllaender, Marco
    Hemes, Magnar
    Lutz, Josef
    MICROELECTRONICS RELIABILITY, 2015, 55 (06) : 903 - 911
  • [10] Press-pack IGBTs, semiconductor switches for pulse power
    Wakeman, F
    Findlay, W
    Li, GR
    PPPS-2001: PULSED POWER PLASMA SCIENCE 2001, VOLS I AND II, DIGEST OF TECHNICAL PAPERS, 2001, : 1051 - 1054
12345