Flow behavior for FGH96 superalloy during two-pass hot deformation and constitutive relationship

被引：0
|
作者：
Fang, Bin [1 ]
Ji, Zhen [1 ]
Tian, Gaofeng [2 ]
Jia, Chengchang [1 ]
Hu, Benfu [1 ]
Wang, Congcong [1 ]
机构：
[1] University of Science and Technology Beijing, Beijing,100083, China
[2] Beijing Institute of Aeronautical Materials, Beijing,100095, China
来源：
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2014年 / 43卷 / 12期
关键词：
The hot deformation behavior and microstructure evolution of FGH96 superalloy has been investigated during two-pass hot deformation in the temperature range of 1050~1125℃ and the strain rate range of 0.001~0.1 s-1 with the strain of 45%+25% by an isothermal interrupted hot compression test via Gleeble-1500. A constitutive relationship including strain; strain rate and temperature was established. The results show that the first and the second pass hot deformations have the same change rules. The solution of γ' and the growth of grain have an effect on both of the two pass hot deformations. The curves of true stress-true strain between mathematical model and measured values are preferably fitting. The mathematical model can reflect the flow stress precisely under different conditions. A better deformed microstructure can be achieved when the temperature is between 1075 and 1100℃; and the strain rate between 0.01 and 0.1 s-1. Copyright © 2014; Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：3089 / 3094
相关论文
共 50 条
  • [21] Effect of powder preparation technology on the hot deformation behavior of HIPed P/M nickel-base superalloy FGH96
    Zhang, M. J.
    Li, F. G.
    Wang, S. Y.
    Liu, C. Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (12): : 4030 - 4039
  • [22] Thermal evolution behavior of carbides and γ′ precipitates in FGH96 superalloy powder
    Zhang, Lin
    Liu, Hengsan
    He, Xinbo
    Rafi-ud-din
    Qu, Xuanhui
    Qin, Mingli
    Li, Zhou
    Zhang, Guoqing
    MATERIALS CHARACTERIZATION, 2012, 67 : 52 - 64
  • [23] Microstructure and mechanical properties of hot extruded FGH96 powder metallurgy superalloy
    Liu, Xiao-Tao
    Ding, Han-Hui
    Yang, Chuan
    Liu, Feng
    Huang, Lan
    Jiang, Liang
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2016, 26 (02): : 354 - 364
  • [24] Simulation of the FGH96 superalloy microstructural changes under different deformation conditions
    Wang, Xiaona
    Li, Fuguo
    Liu, Yuhong
    PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING, PTS 1 AND 2, 2008, 575-578 : 455 - 461
  • [25] The adjustability of hot workability of FGH96 superalloy toward the effect of oxygen on the microstructure
    Zhao, Weiwei
    Liu, Na
    Li, Zhou
    Zhang, Sha
    Zhang, Peng
    Liu, Yufeng
    Zhang, Lin
    Qu, Xuanhui
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 929
  • [26] Study on Constitutive Model for FGH96 Superalloy Based on Bodner-Partom Theory
    Xiao Y.
    Qin H.
    Xu K.
    Cailiao Daobao/Materials Reports, 2020, 34 (16): : 16125 - 16130
  • [27] Deformation behaviors of non-metallic inclusion in FGH96 superalloy during different plastic processes
    Zhang, Mincong
    Liu, Chenyi
    Wang, Shuyun
    MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 1187 - 1191
  • [28] Precipitation behavior of γ′ phase in superalloy FGH96 under interrupted cooling test
    Heng-San Liu
    Lin Zhang
    Xin-Bo He
    Xuan-Hui Qu
    Zhou Li
    Guo-Qing Zhang
    Rare Metals, 2013, 32 : 560 - 563
  • [29] Tensile and Impact Behavior and fracture characteristics of FGH96 Powder Metallurgy Superalloy
    Liu Xinling
    Zhao Kai
    MECHATRONICS ENGINEERING, COMPUTING AND INFORMATION TECHNOLOGY, 2014, 556-562 : 389 - 394
  • [30] Precipitation behavior of γ′ phase in superalloy FGH96 under interrupted cooling test
    Heng-San Liu
    Lin Zhang
    Xin-Bo He
    Xuan-Hui Qu
    Zhou Li
    Guo-Qing Zhang
    RareMetals, 2013, 32 (06) : 560 - 563
12345