Transformation of non-metal inclusions in ultra-low oxygen wheel steel during refining process

被引：0

作者：

Yang, Jun ^{[1
]}

Wang, Xin-Hua ^{[1
]}

Wang, Wan-Jun ^{[1
]}

Gong, Zhi-Xiang ^{[2
]}

Wang, Guo-Cai ^{[2
]}

Tang, Yu ^{[1
]}

机构：

[1] School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China

[2] Technology Center of Ma'anshan Iron and Steel Company Limited, Ma'anshan 243011, China

来源：

Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing | 2010年 / 32卷 / 07期

关键词：

Wheels - Slags - Steelmaking - Refining - Alumina - Aluminum oxide - Hot working;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The formation and transformation of inclusions in high speed wheel steel during refining were studied in ultra-low oxygen steelmaking by LD-LF-VD-CC process. Sufficient aluminium was added to the experimental steel for final deoxidation during tapping, and refining slag with strong deoxidation, high basicity and strong reducibility was used during LF refining. The results show that the casting blanks are of high cleanliness and the total oxygen is only 7 × 10-6. Oxide inclusions in the experimental steel have finished the transformation of Al2O3 → MgO · Al2O3 spinel → CaO-MgO-Al2O3 complex inclusions during LF refining, and the complex oxide inclusions obtained are liquid and easy to remove by collision, coalescence and flotation at steelmaking temperature. Residual oxide inclusions in the steel are CaO-MgO-Al2O3 system complex inclusions with a relatively lower melting point, which have a little deformability during hot-working and can improve the fatigue properties of high speed wheel steel effectively. ©.

引用

下载

页码：860 / 865

共 50 条

[21] Mathematical model of decarburization processes in RH refining for ultra-low carbon steel
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
Zhao, X.-Y. (xyz1076@sina.com), 1600, University of Science and Technology Beijing (34):
[22] Study on CaO and CaS inclusions in pipeline steel during refining process
Li, Shu-Sen
Ren, Ying
Zhang, Li-Feng
Yang, Wen
Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2014, 36 (SUPPL.1): : 168 - 172
[23] Surface texture evolution during α-γ-α transformation in Mn and Al alloyed ultra-low carbon steel
Gautam, Jai
Petrov, Roumen
Kestens, Leo
FUNDAMENTALS OF DEFORMATION AND ANNEALING, 2007, 550 : 503 - +
[24] Effect of Al or Ti addition on the ferrite formation in ultra-low oxygen weld metal of low carbon steel
Mizuguchi, Takashi
Sukemiya, Masatoshi
Yoneji, Takumi
Miyata, Daichi
WELDING INTERNATIONAL, 2023, 37 (07) : 417 - 426
[25] Analysis for Non-Metal Inclusions and Precipitates Leading to the Optimal Steel-Properties and Processes
Yamada, Katsumi
Inoue, Ryo
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2014, 100 (07): : 867 - 872
[26] Effect of Al or Ti addition on the Ferrite Formation in Ultra-low Oxygen Weld Metal of Low Carbon Steel
Mizuguchi T.
Sukemiya M.
Yoneji T.
Miyata D.
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2022, 40 (04): : 266 - 273
[27] Determination of process parameters for refining of ultra-low sulfur steels in ladle furnace
Jiang, Zhou-Hua
Zhan, He-Yan
Zhang, Dong-Ping
Wang, Wen-Zhong
Dongbei Daxue Xuebao/Journal of Northeastern University, 2002, 23 (10): : 952 - 955
[28] Formation and Evolution of Non-metallic Inclusions in Medium Mn Steel during Secondary Refining Process
Kong, Lingzhong
Deng, Zhiyin
Zhu, Miaoyong
ISIJ INTERNATIONAL, 2017, 57 (09) : 1537 - 1545
[29] REMOVAL OF NON-METALLIC INCLUSIONS DURING REFINING REMELTING OF STEEL
POVOLOTSKIY, DY
ROSCHIN, VE
GRECHIN, RI
RUSSIAN METALLURGY, 1974, (03): : 19 - 23
[30] Optimum process of RH treatment for ultra-low carbon steel
Fang, Dong
Liu, Zhongzhu
Cai, Kaike
Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 1999, 21 (05): : 425 - 427

← 1 2 3 4 5 →