Transformation of non-metal inclusions in ultra-low oxygen wheel steel during refining process

被引：0
|
作者：
Yang, Jun [1 ]
Wang, Xin-Hua [1 ]
Wang, Wan-Jun [1 ]
Gong, Zhi-Xiang [2 ]
Wang, Guo-Cai [2 ]
Tang, Yu [1 ]
机构：
[1] School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
[2] Technology Center of Ma'anshan Iron and Steel Company Limited, Ma'anshan 243011, China
来源：
Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing | 2010年 / 32卷 / 07期
关键词：
Wheels - Slags - Steelmaking - Refining - Alumina - Aluminum oxide - Hot working;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The formation and transformation of inclusions in high speed wheel steel during refining were studied in ultra-low oxygen steelmaking by LD-LF-VD-CC process. Sufficient aluminium was added to the experimental steel for final deoxidation during tapping, and refining slag with strong deoxidation, high basicity and strong reducibility was used during LF refining. The results show that the casting blanks are of high cleanliness and the total oxygen is only 7 × 10-6. Oxide inclusions in the experimental steel have finished the transformation of Al2O3 → MgO · Al2O3 spinel → CaO-MgO-Al2O3 complex inclusions during LF refining, and the complex oxide inclusions obtained are liquid and easy to remove by collision, coalescence and flotation at steelmaking temperature. Residual oxide inclusions in the steel are CaO-MgO-Al2O3 system complex inclusions with a relatively lower melting point, which have a little deformability during hot-working and can improve the fatigue properties of high speed wheel steel effectively. ©.
引用
收藏
页码：860 / 865
相关论文
共 50 条
  • [1] Study on Non-metal Inclusions in Ultra-low Oxygen Spring Steel During Process
    Wu Xiaodong
    Chen Ruilong
    Xiao Bo
    Wang Zhongying
    [J]. 2013 INTERNATIONAL CONFERENCE ON PROCESS EQUIPMENT, MECHATRONICS ENGINEERING AND MATERIAL SCIENCE, 2013, 331 : 508 - +
  • [2] Refining technology of ultra-low oxygen steel for spring
    Xue, Zhengliang
    Li, Zhengbang
    Zhang, Jiawen
    [J]. Teshugang/Special Steel, 19 (03): : 31 - 35
  • [3] Simulation of the Refining Process of Ultra-Low Carbon (ULC) Steel
    You, Dali
    Bernhard, Christian
    Viertauer, Andreas
    Linzer, Bernd
    [J]. CRYSTALS, 2021, 11 (08)
  • [4] Study on inclusions in ultra low oxygen 60Si2MnA spring steel during refining process
    Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China
    不详
    [J]. Kang T'ieh, 2008, 10 (29-33):
  • [5] Inclusions in ultra-low carbon steel
    Tang, Fu-Ping
    Chang, Gui-Hua
    Li, Hong
    Chen, Ben-Wen
    [J]. Kang T'ieh/Iron and Steel (Peking), 2007, 42 (01): : 20 - 22
  • [6] Effect of S and Si on the Formation of Intragranular Ferrite and Inclusions in Ultra-low Oxygen Weld Metal of Low Carbon Steel
    Homma, Ryuichi
    Shinohara, Yasuhiro
    Kadoi, Kota
    Inoue, Hiroshige
    [J]. ISIJ INTERNATIONAL, 2021, 61 (01) : 309 - 316
  • [7] Optimum process of RH-MFB refining for ultra-low carbon steel
    Liqun Ai
    [J]. International Journal of Minerals,Metallurgy and Materials, 2002, (05) : 329 - 333
  • [8] Optimum process of RH-MFB refining for ultra-low carbon steel
    Ai, Liqun
    Cai, Kaike
    Wang, Mingdong
    Yang, Subo
    [J]. Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials (Eng Ed), 2002, 9 (05): : 329 - 333
  • [9] Optimum process of RH-MFB refining for ultra-low carbon steel
    Ai, LQ
    Cai, KK
    Wang, MD
    Yang, SB
    [J]. JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2002, 9 (05): : 329 - 333
  • [10] Evolution and control of inclusions of Ti-bearing ultra-low carbon steel during the steelmaking process
    Wenjun Ma
    Bin Chen
    Haibo Li
    Lixia Hao
    Jianguan Chen
    Yi Jia
    Daozheng Liu
    [J]. Progress in Natural Science:Materials International, 2024, 34 (03) : 585 - 590
12345