Influence of exposure time on morphological and electrochemical properties of corrosion products formed by high temperature sulfidation of AISI/SAE-1020 steel

被引:0
|
作者
Sanabria-Cala J.A. [1 ]
Conde-Rodríguez G.R. [1 ]
Laverde-Cataño D.A. [1 ]
Peña-Ballesteros D.Y. [1 ]
Estupiñan Durán H.A. [2 ]
机构
[1] Grupo de Investigaciones en Corrosión, Universidad Industrial de Santander, Bucaramanga, Colombia Parque Tecnológico Guatiguara, Km 2 vía refugio, Piedecuesta
[2] Laboratorio de Biomateriales, Universidad Nacional de Colombia, Sede Medellín. Calle 75 # 79a - 51, Medellín
来源
| 1645年 / Italian Association of Chemical Engineering - AIDIC卷 / 70期
关键词
D O I
10.3303/CET1870275
中图分类号
学科分类号
摘要
In the present investigation, the influence of exposure time on the morphological and electrochemical properties of corrosion products formed on the surface of AISI/SAE-1020 steel was determined, exposed to conditions of a transfer line that enters the atmospheric distillation unit in the opportunity crude oils processing, applying gravimetry and electrochemical measurements. The exposure times used for gravimetric tests were between 24 and 330 hours. Discontinuous gravimetric tests were carried out in a Parr 4848 dynamic autoclave using a heavy crude oil (HCO) with sulfur content of 2.55 %wt. These results contribute to national and international scientific research and petrochemical industry by using a heavy crude oil contaminant such as sulfur, to reduce the corrosion rate of an AISI/SAE-1020 steel from the formation of iron sulfides on its surface. Copyright © 2018, AIDIC Servizi S.r.l.
引用
收藏
页码:1645 / 1650
页数:5
相关论文
共 50 条
  • [21] Influence of chloride ion concentration and temperature on the electrochemical properties of passive films formed on a superduplex stainless steel
    Souza, Elki C.
    Rossitti, Sergio M.
    Rollo, Joao M. D. A.
    MATERIALS CHARACTERIZATION, 2010, 61 (02) : 240 - 244
  • [22] Morphological and electrochemical study of the effect of electrolyte corrosion based on potassium chloride and urea fertilizers on SAE 1020 structural steel substrates covered with titanium dioxide films grown by sputtering in a double cathodic cage
    Donatti, Gustavo Pimentel
    Gontijo, Leonardo Cabral
    MATERIA-RIO DE JANEIRO, 2021, 26 (02):
  • [23] The Effect of Time and Temperature of Nitridation-Oxidation Process on Properties and Corrosion Resistance of AISI 316L Steel
    Yazdkhasti M.
    Ahmad Hosseini S.
    Javadinejad H.
    Zare H.
    Rizi M.S.
    Abedi H.
    Rizi, Mohsen Saboktakin (Mohsen.saboktakin@gmail.com), 2018, Pleiades journals (54) : 508 - 517
  • [24] Influence of pre-deformation, sensitization and oxidation in high temperature water on corrosion resistance of AISI 304 stainless steel
    Lv Jinlong
    Liang Tongxiang
    Luo Hongyun
    NUCLEAR ENGINEERING AND DESIGN, 2016, 309 : 1 - 7
  • [25] Gas Nitriding and the Influence of Temperature and Exposure Time on the Electrochemical Corrosion Behavior of Titanium Grade 2 in Hydrochloric Acid
    Fernandes, Flavia Dias
    Savonov, Graziela da Silva
    Landers, Richard
    Valentim, Monalisa Bandeira
    Velloso, Veronica Mara de Oliveira
    Barboza, Miguel Justino Ribeiro
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,
  • [26] Electrochemical, morphological and theoretical evaluation of a new poly(3-sulfolene-co-cis-2-butene-1,4-dilinoleate) against corrosion of AISI 1020 steel in 0.1 N HCl solution
    Tuama, R. J.
    INTERNATIONAL JOURNAL OF CORROSION AND SCALE INHIBITION, 2024, 13 (02): : 1084 - 1102
  • [27] Influence of pH on electrochemical properties of passive films formed on Alloy 690 in high temperature aqueous environments
    Huang, Junbo
    Wu, Xinqiang
    Han, En-Hou
    CORROSION SCIENCE, 2009, 51 (12) : 2976 - 2982
  • [28] Influence of Tempering Time on the Microstructure and Mechanical Properties of AISI M42 High-Speed Steel
    Luo, Yi-Wa
    Guo, Han-Jie
    Sun, Xiao-Lin
    Guo, Jing
    Wang, Fei
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (12): : 5976 - 5986
  • [29] Influence of Tempering Time on the Microstructure and Mechanical Properties of AISI M42 High-Speed Steel
    Yi-Wa Luo
    Han-Jie Guo
    Xiao-Lin Sun
    Jing Guo
    Fei Wang
    Metallurgical and Materials Transactions A, 2018, 49 : 5976 - 5986
  • [30] Influence of steel fiber corrosion on tensile properties and cracking mechanism of ultra-high performance concrete in an electrochemical corrosion environment
    Lv, Liang-Sheng
    Wang, Jun-Yan
    Xiao, Ru-Cheng
    Fang, Ming-Shan
    Tan, Yu
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 278