Influence of exposure time on morphological and electrochemical properties of corrosion products formed by high temperature sulfidation of AISI/SAE-1020 steel

被引：0
|
作者：
Sanabria-Cala J.A. [1 ]
Conde-Rodríguez G.R. [1 ]
Laverde-Cataño D.A. [1 ]
Peña-Ballesteros D.Y. [1 ]
Estupiñan Durán H.A. [2 ]
机构：
[1] Grupo de Investigaciones en Corrosión, Universidad Industrial de Santander, Bucaramanga, Colombia Parque Tecnológico Guatiguara, Km 2 vía refugio, Piedecuesta
[2] Laboratorio de Biomateriales, Universidad Nacional de Colombia, Sede Medellín. Calle 75 # 79a - 51, Medellín
来源：
| 1645年 / Italian Association of Chemical Engineering - AIDIC卷 / 70期
关键词：
D O I：
10.3303/CET1870275
中图分类号：
学科分类号：
摘要：
In the present investigation, the influence of exposure time on the morphological and electrochemical properties of corrosion products formed on the surface of AISI/SAE-1020 steel was determined, exposed to conditions of a transfer line that enters the atmospheric distillation unit in the opportunity crude oils processing, applying gravimetry and electrochemical measurements. The exposure times used for gravimetric tests were between 24 and 330 hours. Discontinuous gravimetric tests were carried out in a Parr 4848 dynamic autoclave using a heavy crude oil (HCO) with sulfur content of 2.55 %wt. These results contribute to national and international scientific research and petrochemical industry by using a heavy crude oil contaminant such as sulfur, to reduce the corrosion rate of an AISI/SAE-1020 steel from the formation of iron sulfides on its surface. Copyright © 2018, AIDIC Servizi S.r.l.
引用
收藏
页码：1645 / 1650
页数：5
相关论文
共 50 条
  • [1] Effect of contents oil temperature and flow rate in the electrochemical corrosion of the AISI-SAE1020-steel
    Cedeno, M. L.
    Vera, E. L.
    Pineda, Y. T.
    II COLOMBIAN CONGRESS OF ELECTROCHEMISTRY (CCEQ) AND 2ND SYMPOSIUM ON NANOSCIENCE AND NANOTECHNOLOGY (SNN), 2017, 786
  • [2] Electrochemical corrosion of AISI/SAE 1020 steel in water/oil/CO2 systems
    Cedeno Vente, Martha Lorena
    Vera Lopez, Enrique
    Pineda Triana, Yaneth
    REVISTA CUBANA DE INGENIERIA, 2018, 9 (02): : 39 - 48
  • [3] 3DII implantation effect on corrosion properties of the AISI/SAE 1020 steel
    Dulcé, WJ
    Rueda, A
    Dougar-Jabon, V
    Physica Status Solidi C - Conference and Critical Reviews, Vol 2, No 10, 2005, 2 (10): : 3778 - 3781
  • [4] Evaluation of corrosion products formed by sulfidation as inhibitors of the naphthenic corrosion of AISI-316 steel
    Sanabria-Cala, J. A.
    Montanez, N. D.
    Laverde Catano, D.
    Pena Ballesteros, D. Y.
    Mejia, C. A.
    4TH INTERNATIONAL MEETING FOR RESEARCHERS IN MATERIALS AND PLASMA TECHNOLOGY (4TH IMRMPT), 2017, 935
  • [5] EVALUATION OF CORROSION BY PITTING OF AISI SAE 1020 STEEL IN A SYNTHETIC WELL FLUID USING ELECTROCHEMICAL NOISE
    Sierra Suarez, Luis Enelso
    Santafe Rangel, Elkin Rodolfo
    Patricia Ortiz, Olga
    Piedrahit Escobar, Carlos Cesar
    FUENTES EL REVENTON ENERGETICO, 2007, 5 (02): : 39 - 52
  • [6] Influence of temperature and time on the corrosion by sulfidation of AISI-316 steel exposed under transfer line
    Cala J.S.
    Cataño D.L.
    Ballesteros D.P.
    Arenas D.M.
    Chemical Engineering Transactions, 2017, 57 : 715 - 720
  • [7] Effect of post-oxidizing time on corrosion properties of plasma nitrocarburized AISI 1020 steel
    Lee, KH
    Nam, KS
    Shin, PW
    Lee, DY
    Song, YS
    MATERIALS LETTERS, 2003, 57 (13-14) : 2060 - 2065
  • [8] Influence of the exposure of AISI 304L stainless steel at moderately high temperature on the susceptibility to crevice corrosion
    Trasatti, SP
    Camona, E
    Mazza, F
    Sivieri, E
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 1998, 28 (12) : 1333 - 1341
  • [9] Influence of the exposure of AISI 304L stainless steel at moderately high temperature on the susceptibility to crevice corrosion
    S. P. Trasatti
    E. Camona
    F. Mazza
    E. Sivieri
    Journal of Applied Electrochemistry, 1998, 28 : 1333 - 1341
  • [10] Evaluation of the synergistic behavior of erosion-corrosion on steel AISI-SAE 1020 in a multiphase flow brine-CO2-sand by electrochemical techniques
    Machuca, Jesus
    Pena, Dario
    Escalante, Humberto
    REVISTA FACULTAD DE INGENIERIA-UNIVERSIDAD DE ANTIOQUIA, 2010, (53): : 42 - 53
12345