Experimental investigation on the seismic behavior of RC beams strengthened with high ductility concrete

被引：0

作者：

Deng M.-K. ^{[1
]}

Guo L.-Y. ^{[1
]}

Li R.-Z. ^{[1
]}

Chen J.-L. ^{[2
]}

机构：

[1] School of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an

[2] Dalian Hongyu Real Estate Co., Ltd, Xi'an

来源：

Deng, Ming-Ke (dengmingke@126.com) | 1600年 / Tsinghua University卷 / 37期

关键词：

HDC; Low cyclic loading test; RC beam; Seismic performance; Strengthening;

D O I：

10.6052/j.issn.1000-4750.2019.04.0237

中图分类号：

学科分类号：

摘要：

To investigate the seismic behavior of reinforced concrete (RC) beams with high ductility concrete (HDC), eight RC beams were designed and strengthened with HDC jackets and carbon fiber strips. The failure modes, deformation capacity and energy dissipation capacity of the specimens were studied under low cyclic loading tests. The experimental results show that: The tensile strain hardening and multiple cracking of HDC can effectively control the development of shear cracks of the beams strengthened with HDC during the failure process and the HDC-strengthening system is effective to improve the brittle failure characteristics; HDC can provide obvious constraint for the core concrete. The shear strength, ductility and energy dissipation capacity of the strengthened beams are significantly improved. The HDC jacket could be more effective than the carbon fiber strips in enhancing the behavior of the beams; When the shear span is relatively large, using mesh reinforcements in the HDC jacket improves the ductility and energy dissipation capacity. However, it contributes little to the shear capacity. A calculation method for the shear capacity of strengthened beams is proposed based on a truss-arch model. The calculated results have good agreement with the test results. Copyright ©2020 Engineering Mechanics. All rights reserved.

引用

页码：47 / 57

页数：10

共 34 条

[21] Specification of testing methods for earthquake resistant building, (2015)
[22] Shi Weiming, Beam-column joints in reinforcement and reconstruction of buildings, (2011)
[23] Liu Lixin, Tian Qiu, A discussion for failure mechanisms and ultimate strength of RC members with shear and members with torsion, Journal of Zhengzhou Institute of Technology, 15, 4, pp. 1-12, (1994)
[24] Liu Lixin, An unified calculation method for shear capacity of RC deep beams, short beam sand shallow beams, Journal of Building Structures, 16, 4, pp. 13-21, (1995)
[25] GB 50367−2013, Code for design of strengthening concrete structure, (2013)
[26] Yu Bo, Chen Bing, Tang Ruikai, Wan Weiwei, Probabilistic model for critical crack angle of reinforced concrete beams, Chinese Journal of Computational Mechanics, 35, 1, pp. 98-104, (2018)
[27] Wei Weiwei, Study on shear capacity and deformation for reinforced concrete structure based on modified compression field theory, (2010)
[28] Song Shiyan, Ye Lieping, Comparison of design methods for flexure strength of RC beams between Chinese and American design codes for RC structures, Building Science, 23, 7, pp. 28-33, (2007)
[29] A23.3-04, Design of concrete structures, (2004)
[30] Bentz E C, Collins M P., Development of the 2004 Canadian Standards Association (CSA) A23.3 shear provisions for reinforced concrete, Canadian Journal of Civil Engineering, 33, 5, pp. 521-534, (2006)

← 1 2 3 4 →