Effect of abrasion on the air permeability & mass loss of breathable-coated fabrics

被引:0
|
作者
Padleckiene, Ingrida [1 ]
Petrulis, Donatas [1 ]
机构
[1] Kaunas University of Technology, Department of Textile Technology, Studentu str. 56, Kaunas LT-51424, Lithuania
来源
Fibres and Textiles in Eastern Europe | 2009年 / 73卷 / 02期
关键词
Abrasion - Functions - Protective coatings - Tribology;
D O I
暂无
中图分类号
学科分类号
摘要
This paper presents a study on air permeability and relative mass loss in abraded breathable-coated fabrics. The abrasion treatment of different structured samples as well as the outer and reverse sides of specimens was done on a Martindale tester, varying the number of abrasion cycles. Considerable attention was devoted to the importance of the coating and textile substrate abrasion. Trends in the relationships between the abrasion cycles and the above-mentioned properties of the coated fabrics are discussed. The results support the nonlinear function approach nonlinear function.
引用
收藏
页码:50 / 54
相关论文
共 40 条
  • [21] Comparable analysis of the end-use properties of woven fabrics with fancy yarns. Part I: Abrasion resistance and air permeability
    Kumpikaite, Egle
    Ragaišiene, Audrone
    Barburski, Marcin
    Fibres and Textiles in Eastern Europe, 2010, 80 (03): : 56 - 59
  • [22] Comparable Analysis of the End-Use Properties of Woven Fabrics with Fancy Yarns. Part I: Abrasion Resistance and Air Permeability
    Kumpikaite, Egle
    Ragaisiene, Audrone
    Barburski, Marcin
    FIBRES & TEXTILES IN EASTERN EUROPE, 2010, 18 (03) : 56 - 59
  • [23] Effect of Design and Method of Creating Wicking Channels on Moisture Management and Air Permeability of Cotton Fabrics
    Nazir, Ahsan
    Hussain, Tanveer
    Abbas, Ghulam
    Ahmed, Afif
    JOURNAL OF NATURAL FIBERS, 2015, 12 (03) : 232 - 242
  • [24] Investigating the Effect of Fabric and Lamination-Foam Properties on the Air Permeability of Laminated Headrest Fabrics
    Aksoy, Seray
    Erturk, Semih
    Isilak, Cemil
    Mecit, Diren
    Oylar, Semih
    TEKSTIL VE KONFEKSIYON, 2021, 31 (04): : 235 - 241
  • [25] Effect of alumina particle morphology used for air abrasion on loss of enamel and luting composite resin
    Tuerp, Lisa
    Bartels, Nomi
    Wille, Sebastian
    Lehmann, Frank
    Kern, Matthias
    DENTAL MATERIALS, 2021, 37 (12) : e523 - e532
  • [26] Effect of inner layer structures of weft-knitted spacer fabrics on thermal insulation and air permeability
    Buzaite, Vaida
    Mikucioniene, Daiva
    TEXTILE RESEARCH JOURNAL, 2022, 92 (15-16) : 2862 - 2872
  • [27] An investigation on the effect of elastane draw ratio on air permeability of denim bi-stretch denim fabrics
    Celik, H. I.
    Kaynak, H. K.
    17TH WORLD TEXTILE CONFERENCE AUTEX 2017 - SHAPING THE FUTURE OF TEXTILES, 2017, 254
  • [28] Effect of air-abrasion pre-treatment with bioactive glass 45S5 on enamel surface loss after erosion/abrasion challenge
    Dionysopoulos, Dimitrios
    Tolidis, Kosmas
    Sfeikos, Thrasyuoulos
    DENTAL MATERIALS, 2019, 35 (09) : E193 - E203
  • [29] Effect of air permeability and water vapor permeability upon simultaneous heat and mass transfer in simulated clothing systems.
    Fukazawa, T
    Satsumoto, Y
    Takeuchi, M
    Ishikawa, K
    SEN-I GAKKAISHI, 1998, 54 (09) : 443 - 451
  • [30] Effect of structural parameters of porous yarns and fabric on air permeability and moisture transfer of double-face woven fabrics
    Lolaki, Asal
    Shanbeh, Mohsen
    Borhani, Sedigheh
    JOURNAL OF THE TEXTILE INSTITUTE, 2017, 108 (06) : 992 - 1000