Mechanism of precipitation strengthing and twinning strengthing in annealing process of Fe-24Mn-3Si-3Al TWIP steel

被引：0

作者：

Yang Y.-G. ^{[1
]}

Mi Z.-L. ^{[1
]}

Jiang H.-T. ^{[1
]}

Li H. ^{[2
]}

Xu M. ^{[1
]}

机构：

[1] Institute of Engineering Technology, University of Science and Technology Beijing, Beijing

[2] College of Engineering, Yantai Nanshan University, Yantai

来源：

Mi, Zhen-Li (mizl@nercar.ustb.edu.cn) | 1600年 / Science Press卷 / 39期

关键词：

Annealing; Carbide precipitation; Secondary twin; Strengthening mechanism; TWIP steel;

D O I：

10.13374/j.issn2095-9389.2017.06.006

中图分类号：

学科分类号：

摘要：

The mechanical properties and strengthening mechanism of Fe-24Mn-3Si-3Al TWIP steels were investigated as a function of annealing process. The microstructures of the samples were analyzed by transmission electron microscopy, scanning electron microscopy, energy disperse spectroscopy. The experimental results indicate that as the annealing temperature and the holding time change, the mechanical properties of TWIP steel do not rise or fall monotonously, as would be conventionally. The mechanical properties change in the annealing processes of annealing temperature 800℃ for 10 min and 900℃ for 20 min. The strengthening mechanism is mainly dispersion strengthening in the case of annealing process of 800℃ annealing temperature for 10 min, and an increase in the precipitation of (Fe, Mn)23C6 leads to better mechanical properties. However, in the case of annealing process of 900℃ for 20 min, the precipitation of (Fe, Mn)23C6 does not change obviously, but many twinning systems are initiated and secondary twin and twin delivery are observed, which result in an increase in the ultimate tensile strength. © All right reserved.

引用

页码：854 / 858

页数：4

共 17 条

[11] Hu G.X., Fundamentals of Materials Science, (2010)
[12] Yu Y.N., Theory of Metallography, (2000)
[13] Gladman T., Precipitation hardening in metals, Mater Sci Technol, 15, 1, (1999)
[14] Li H.Y., Research on Microstructures, Mechanical Properties and Deformation Mechanisms of High Manganese Steels with High Strength and Plasticity, (2012)
[15] Zhang J.W., Material Electronic Microscopic Analysis, (2012)
[16] Scot C., Remy B., Collet J.L., Et al., Precipitation strengthening in high manganese austenitic TWIP steels, Int J Mater Res, 102, 5, (2011)
[17] Ding H., Gu K.C., Liu S., Et al., Carbides in as-cast manganese steels, J Shenyang Univ Technol, 24, 3, (2002)

← 1 2 →