Mechanism of precipitation strengthing and twinning strengthing in annealing process of Fe-24Mn-3Si-3Al TWIP steel

被引：0
|
作者：
Yang Y.-G. [1 ]
Mi Z.-L. [1 ]
Jiang H.-T. [1 ]
Li H. [2 ]
Xu M. [1 ]
机构：
[1] Institute of Engineering Technology, University of Science and Technology Beijing, Beijing
[2] College of Engineering, Yantai Nanshan University, Yantai
来源：
Mi, Zhen-Li (mizl@nercar.ustb.edu.cn) | 1600年 / Science Press卷 / 39期
关键词：
Annealing; Carbide precipitation; Secondary twin; Strengthening mechanism; TWIP steel;
D O I：
10.13374/j.issn2095-9389.2017.06.006
中图分类号：
学科分类号：
摘要：
The mechanical properties and strengthening mechanism of Fe-24Mn-3Si-3Al TWIP steels were investigated as a function of annealing process. The microstructures of the samples were analyzed by transmission electron microscopy, scanning electron microscopy, energy disperse spectroscopy. The experimental results indicate that as the annealing temperature and the holding time change, the mechanical properties of TWIP steel do not rise or fall monotonously, as would be conventionally. The mechanical properties change in the annealing processes of annealing temperature 800℃ for 10 min and 900℃ for 20 min. The strengthening mechanism is mainly dispersion strengthening in the case of annealing process of 800℃ annealing temperature for 10 min, and an increase in the precipitation of (Fe, Mn)23C6 leads to better mechanical properties. However, in the case of annealing process of 900℃ for 20 min, the precipitation of (Fe, Mn)23C6 does not change obviously, but many twinning systems are initiated and secondary twin and twin delivery are observed, which result in an increase in the ultimate tensile strength. © All right reserved.
引用
收藏
页码：854 / 858
页数：4
相关论文
共 17 条
  • [1] Grassel O., Kruger L., Frommeyer G., Et al., High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development properties application, Int J Plast, 16, 10, (2000)
  • [2] Tang D., Mi Z.L., Chen Y.L., Technology and research and development of advanced automobile steel abroad, Iron Steel, 40, 6, (2005)
  • [3] Kang Y.L., Theory and Technology of Process and Forming for Advanced Automobile Steel Sheets, (2009)
  • [4] Mi Z.L., Tang D., Jiang H.T., Et al., Effects of annealing temperature on the microstructure and properties of the 25Mn-3Si-3Al TWIP steel, Int J Miner Metall Mater, 16, 2, (2009)
  • [5] Zhang J.D., Research on Processing and Microstructures and Mechanical Properties of TWIP780 Steel, (2012)
  • [6] Gao Y.L., Hu S.L., Yuan S.Q., Et al., Effect of different water toughening treatment on mechanical properties and microstructure of Fe-Mn-C TWIP steel, Ordnance Mater Sci Eng, 36, 2, (2013)
  • [7] Kang S., Jung Y.S., Jun J.H., Et al., Effects of recrystallization annealing temperature on carbide precipitation, microstructure, and mechanical properties in Fe-18Mn-0.6C-1.5Al TWIP steel, Mater Sci Eng A, 527, 3, (2010)
  • [8] Santos D.B., Saleh A.A., Gazder A.A., Et al., Effect of annealing on the microstructure and mechanical properties of cold rolled Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel, Mater Sci Eng A, 528, 10, (2011)
  • [9] Chen S.L., Effect of Annealing Temperatures and Strain Rates on Tensile Properties of Fe-20Mn-0.6C TWIP Steel, (2013)
  • [10] Ning S.L., Guo Y.H., Xu C., Et al., Effects of annealing temperature on microstructure and mechanical properties of Fe-18Mn-3Si-3Al TWIP steel, Hot Working Technol, 44, 24, (2015)
12