LAMINAR FORCED CONVECTION AND PERFORMANCE EVALUATION IN A SQUARE DUCT HEAT EXCHANGER PLACED WITH WAVY THIN RIB

被引：0
|
作者：
Boonloi A. [1 ]
Jedsadaratanachai W. [2 ]
机构：
[1] Department of Mechanical Engineering Technology, College of Industrial Technology, King Mongkut’s University of Technology North Bangkok, Bangkok
[2] Department of Mechanical Engineering, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok
来源：
Frontiers in Heat and Mass Transfer | 2020年 / 15卷
关键词：
heat exchanger; heat transfer; numerical investigation; thermal performance; Wavy thin rib;
D O I：
10.5098/HMT.15.13
中图分类号：
学科分类号：
摘要：
Simulated examinations on convective heat transfer and flow topology in a square duct heat exchanger placed with wavy thin rib (WTR) are presented. The influences of WTR heights, pitch distances and flow directions on flow and heat transfer characteristics are investigated for the laminar flow regime at the inlet condition (Re = 100 – 2000). The finite volume method (SIMPLE algorithm) is picked to analyze the numerical problem. The numerical validations; grid independence and verification of the smooth duct, are presented. The simulated results of the heat exchanger duct placed with WTR are reported in terms of flow and heat transfer visualizations. The relations of the Nu/Nu0, f/f0 and TEF with Re and P/H in the heat exchanger square duct inserted with WTR are also plotted. The numerical result reveals that the heat transfer and friction loss increase when augmenting the Reynolds number and WTR height. The optimum pitch spacing ratio may give the highest heat transfer rate and thermal performance. © 2020, Tech Science Press. All rights reserved.
引用
收藏
相关论文
共 50 条
12345