Damage tolerance assessment for fatigue-critical locations of wing structure of aged aircraft

被引：1

作者：

Chun Y.-C. ^{[1
]}

Kim W.-C. ^{[1
]}

Jin J.-W. ^{[1
]}

Chung T.-J. ^{[1
]}

Kang K.-W. ^{[1
]}

机构：

[1] Dept. of Mechanical Engineering, Kunsan Nat'l Univ.

来源：

Kang, Ki-Weon (kwkang68@kunsan.ac.kr) | 1600年 / Korean Society of Mechanical Engineers卷 / 41期

关键词：

Fatigue crack growth analysis; Fatigue crack growth experiment; Fatigue critical location; Fatigue stress spectrum;

D O I：

10.3795/KSME-A.2017.41.2.129

中图分类号：

学科分类号：

摘要：

This study aims to assess the damage tolerance of the wing structure of aged aircraft with long-term service through the fatigue crack growth analysis and tests. For the fatigue-critical locations (FCL) W2 and W4 in the wing structure, the fatigue stress spectrum was derived based on a previous study. Thereafter, a crack propagation analysis for the FCLs was conducted using the commercial software NASGROTM. The algorithm for the fatigue stress spectrum was verified. Fatigue crack growth tests were then performed for two types of specimens: Type #1 was extracted from the wing structure of aged aircraft, and Type #2 was made of the same material as the wing structure. By comparing the experimental results of these specimens, we assessed the damage tolerance of the wing structure of aged aircraft with service time. © 2017 The Korean Society of Mechanical Engineers.

引用

页码：129 / 136

页数：7

共 50 条

[21] Investigation on Damage Tolerance of Thick Laminate for Aircraft Composite Structure
Park, Hyunbum
Kong, Changduk
Shin, Chuljin
COMPOSITES RESEARCH, 2012, 25 (04): : 105 - 109
[22] Determination of critical concrete pavement fatigue damage locations using influence lines
Hiller, JE
Roesler, JR
JOURNAL OF TRANSPORTATION ENGINEERING, 2005, 131 (08) : 599 - 607
[23] Permissible Stresses for Transport Aircraft Structures According to Fatigue and Damage Tolerance Criteria
Nesterenko, B. G.
Nesterenko, G. I.
JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY, 2013, 42 (02): : 114 - 123
[24] CITATION CLASSIC - THE SIGNIFICANCE OF FATIGUE CRACK CLOSURE - DAMAGE TOLERANCE IN AIRCRAFT STRUCTURES
ELBER, W
CURRENT CONTENTS/ENGINEERING TECHNOLOGY & APPLIED SCIENCES, 1983, (50): : 22 - 22
[25] Damage Assessment of an Aircraft's Wing Spar Using Gaussian Process Regressors
Razzini, Adrielly H.
Todd, Michael D.
Kresse, Iddo
Offir, Yoav
Tur, Moshe
Yehoshua, Tal
EUROPEAN WORKSHOP ON STRUCTURAL HEALTH MONITORING (EWSHM 2022), VOL 3, 2023, : 392 - 400
[26] Assessment of damage tolerance approaches for composite aircraft with focus on barely visible impact damage
Talreja, Ramesh
Nam Phan
COMPOSITE STRUCTURES, 2019, 219 : 1 - 7
[27] Numerical study of fatigue damage accumulation in composite wing panels of prospective supersonic transport aircraft
Turbin N.V.
Shelkov K.A.
Aerospace Systems, 2023, 6 (03) : 481 - 490
[28] Probabilistic assessment of the influence of multiple site cracking on the damage tolerance of aircraft
Orisamolu, IR
ICAF 97: FATIGUE IN NEW AND AGEING AIRCRAFT, VOLS I AND II: VOL I: LECTURE PAPERS, VOL II: POSTER PAPERS, 1997, : 683 - 694
[29] Investigation on repairable damage tolerance for structural design of aircraft composite structure
Park H.
Park, Hyunbum (swordship@daum.net), 2016, SAGE Publications Ltd (2016) : 1 - 5
[30] DAMAGE TOLERANCE OF AIRCRAFT SANDWICH STRUCTURE - PRINCIPLE "FAIL-SAFE"
Tumanov, Darko
Markovic, Biljana
SIXTH INTERNATIONAL SYMPOSIUM ABOUT FORMING AND DESIGN IN MECHANICAL ENGINEERING, 2010, : 99 - 106

← 1 2 3 4 5 →