Structure, morphology and electrochemical properties of zinc–cobalt oxide films on AISI 304 type steel

被引：0
|
作者：
机构：
[1] Sulciute, Agne
[2] Baltrusaitis, Jonas
[3] Valatka, Eugenijus
来源：
Valatka, Eugenijus (eugenijus.valatka@ktu.lt) | 1600年 / Kluwer Academic Publishers卷 / 45期
关键词：
Zn–Co oxide films were prepared by electrochemical deposition under potentiostatic conditions. The effects of synthesis conditions on structure; morphology; composition and electrochemical properties of deposited films were studied by atomic absorption spectroscopy; Fourier transform infrared; X-ray photoelectron spectroscopy; X-ray diffraction; scanning electron microscopy and photovoltammetry analysis. It has been determined that the as-deposited films are lamellar with intercalated acetate ions; consisting of ZnO and α-Co(OH)2 phases. The annealed films retain the same structure without impurities and consist of wurtzite-type ZnO and spinel-type Co3O4. The photoelectrochemical performance and the specific capacitance of the prepared electrodes were evaluated in 0.1 mol × L−1 NaOH aqueous solutions. The obtained experimental results showed that the values of specific capacitance increase with the increase in the amount of cobalt (hydr)oxide. On the contrary; the photoactivity decreases with the increase in cobalt content in the films. © 2015; Springer Science+Business Media Dordrecht;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [21] Synthesis of carbon nanoparticles/zinc oxide/zinc cobalt oxide composite and its electrochemical properties
    Shaikh, Hamid M.
    Siva Kumar, Nadavala
    Mahmood, Asif
    Ceramics International, 2020, 46 (11): : 18096 - 18100
  • [22] MORPHOLOGY OF OXIDE FILM GROWTH ON AISI TYPE 304 STAINLESS STEEL IN HIGH TEMPERATURE WATER AT 300 DEGREES AND 350 DEGREES C
    FRANCIS, JM
    WHITLOW, WH
    JOURNAL OF NUCLEAR MATERIALS, 1966, 20 (01) : 1 - &
  • [23] Influence of temperature on the electrochemical coloration process and properties of the AISI 304 and 430 colored stainless steel
    Silva, J. L.
    Canella Carneiro, Andreia Rocha
    Castro, Geovane Martins
    Martins Nunes, Eduardo Henrique
    Cunha Lins, Vanessa de Freitas
    Rabelo Junqueira, Rosa Maria
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 16 : 102 - 109
  • [24] Influence of the morphology of zinc oxide nanoparticles on the properties of zinc oxide/nanocellulose composite films
    Ning, Ruizhi
    Takeuchi, Miyuki
    Lin, Jin-Ming
    Saito, Tsuguyuki
    Isogai, Akira
    REACTIVE & FUNCTIONAL POLYMERS, 2018, 131 : 293 - 298
  • [25] POSTIRRADIATION CREEP-RUPTURE PROPERTIES OF AISI TYPE-304 STAINLESS STEEL
    LOVELL, AJ
    TRANSACTIONS OF THE AMERICAN NUCLEAR SOCIETY, 1969, 12 (01): : 127 - &
  • [26] HIGH STRAIN RATE TENSILE PROPERTIES OF AISI TYPE 304 STAINLESS STEEL.
    Steichen, J.M.
    1600,
  • [27] HIGH STRAIN RATE TENSILE PROPERTIES OF AISI TYPE 304 STAINLESS-STEEL
    STEICHEN, JM
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1973, 95 (03): : 182 - 185
  • [28] Effect of the morphology of zinc oxide layers on the electrochemical properties of biosensors
    Tolubayeva, D. B.
    Gritsenko, L. V.
    RECENT CONTRIBUTIONS TO PHYSICS, 2022, 83 (04): : 29 - 37
  • [29] MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF FRICTION WELDED AISI 304 STAINLESS STEEL TO AISI 1060 STEEL
    Ates, H.
    Kaya, N.
    ARCHIVES OF METALLURGY AND MATERIALS, 2014, 59 (03) : 841 - 846
  • [30] Influence of post irradiation annealing on the mechanical properties and defect structure of AISI 304 steel
    Van Renterghem, W.
    Al Mazouzi, A.
    Van Dyck, S.
    JOURNAL OF NUCLEAR MATERIALS, 2011, 413 (02) : 95 - 102
12345