Polyester resin as a compatibilizing agent for some polymeric blends

被引：0
|
作者：
Ward, A.M. [1 ]
Mansour, S.H. [2 ]
Abd-El-Messieh, S.L. [1 ]
机构：
[1] Microwave Physics and Dielectrics Department, National Research Centre, Dokki, Cairo, Egypt
[2] Polymers and Pigments Department, National Research Centre, Dokki, Cairo, Egypt
来源：
Journal of Applied Polymer Science | 2008年 / 108卷 / 02期
关键词：
Dielectric and viscosity techniques were used to determine the degree of the compatibility of poly(methyl methacrylate) /polycarbonate, poly(methyl methacrylate)/polystyrene, and polycarbonate/polystyrene blends in different ratios (25/75, 50/50, and 75/25 w/w). The effect of the addition of 5,10, and 20% concentrations of the prepared polyester resin [poly(butylene terephthalate adipate)] on the compatibility of these blends was studied. The dielectric properties were measured over a frequency range (from 100 Hz to 100 kHz) at various temperatures covering the glass-transition temperatures of the polymers used (from 30 to 170°C). It was found from the dielectric and viscosity measurements that the addition of 10% polyester to poly(methyl methacrylate)/polycarbonate, 20% polyester to poly(methyl methacrylate)/ polystyrene, and 5% polyester to polycarbonate/polystyrene blends enhanced the degree of compatibility of such blends. © 2008 Wiley Periodicals, Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：833 / 844
相关论文
共 50 条
  • [21] THERMAL MODIFICATION OF LIQUID-CRYSTALLINE POLYESTER PHENOXY RESIN BLENDS
    KODAMA, M
    KOBUNSHI RONBUNSHU, 1991, 48 (02) : 89 - 95
  • [22] POLY(ETHYLENE OXIDE) BLENDS WITH CROSS-LINKING POLYESTER RESIN
    MUCHA, M
    COLLOID AND POLYMER SCIENCE, 1994, 272 (09) : 1090 - 1097
  • [23] Evaluation of the effect of compatibilizing agent (PP-g-MA) on PP/Thermoplastic starch blends
    Ribeiro de Oliveira, Carlos Ivan
    de Almeida, Vinicius Pereira
    Guimaraes Rocha, Marisa Cristina
    de Assis, Joaquim Teixeira
    MATERIA-RIO DE JANEIRO, 2019, 24 (03):
  • [24] The compatibilizing effect of epoxy resin (EP) on polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr) blends
    Ismail, H.
    Galpaya, D.
    Ahmad, Z.
    POLYMER TESTING, 2009, 28 (04) : 363 - 370
  • [25] Epoxidized cardanol-based prepolymer as promising biobased compatibilizing agent for PLA/PBAT blends
    Farias da Silva, Juliana M.
    Soares, Bluma G.
    Polymer Testing, 2021, 93
  • [26] Simultaneously Strengthening and Toughening Biodegradable Polylactic Acid/Thermoplastic Starch Blends by Compatibilizing with Epoxy-Terminated Hyperbranched Polyester
    Guo, Maolin
    Jin, Yujuan
    Han, Xiaolong
    Sun, Jianjian
    Tian, Huafeng
    Hu, Jing
    JOURNAL OF POLYMERS AND THE ENVIRONMENT, 2024, 32 (07) : 3025 - 3038
  • [27] Compatibilizing bulk polymer blends by using organoclays
    Si, Mayu
    Araki, Tohru
    Ade, Harald
    Kilcoyne, A. L. D.
    Fisher, Robert
    Sokolov, Jonathan C.
    Rafailovich, Miriam H.
    MACROMOLECULES, 2006, 39 (14) : 4793 - 4801
  • [28] Effect of molecular weight and architecture of the compatibilizing agent on the emulsification of polystyrene/ethylene-propylene rubber blends
    Polym Mater Sci Eng Proc ACS Div Polym Mater Sci Eng, (16):
  • [29] Crystallization kinetics of thermosetting polymer blends of poly(ε-caprolactone) and unsaturated polyester resin
    Guo, QP
    Zheng, HF
    JOURNAL OF APPLIED POLYMER SCIENCE, 1999, 74 (02) : 322 - 327
  • [30] Novel Interacting Blends of Unsaturated Polyester-s-Triazine and Epoxy Resin
    Patel, R. P.
    Chaudhari, J. A.
    INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS, 2010, 59 (12) : 959 - 969
12345