Investigation and Optimization of Thermoplastic Material by Fused Deposition Modeling

被引：0
|
作者：
Ramachandran P. [1 ]
Pandian P. [1 ]
Antony J.J.B.J.P. [1 ]
机构：
[1] Dept. of Mech. Engg, Ramco Institute of Tech, Tamil Nadu, Rajapalayam
来源：
International Journal of Vehicle Structures and Systems | 2023年 / 15卷 / 04期
关键词：
Additive manufacturing; Analysis of variance; Fused deposition modeling; Rockwell hardness test; Taguchi;
D O I：
10.4273/ijvss.15.4.20
中图分类号：
学科分类号：
摘要：
Additive manufacturing is a booming technology nowadays. This helps to create some complicated shapes of the product. ASTM-D785-03 standard is used to create two different test specimens by fused deposition method (FDM). The parameters are layer thickness; infill density and infill pattern. After the printing is completed, the specimens are subjected to the mechanical test. Hardness is the material property that enables it to resist penetration, scratching, indentation and plastic deformations. In this project hardness of the thermoplastic (nylon and polycarbonate) material fabricated under different FDM process parameters is tested by Rockwell hardness test. Once the tests are completed, the results are taken for optimization through the use of Minitab software. © 2023. Carbon Magics Ltd.
引用
收藏
页码：559 / 561
页数：2
相关论文
共 50 条
  • [41] Improving the fracture toughness of 3D printed thermoplastic polymers by fused deposition modeling
    Julien Gardan
    Ali Makke
    Naman Recho
    International Journal of Fracture, 2018, 210 : 1 - 15
  • [42] Optimization of fused deposition modeling (FDM) process parameters for flexural strength
    Dev, Saty
    Srivastava, Rajeev
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 3012 - 3016
  • [43] Parameter Optimization Design Considering the Stability of the Fused Deposition Modeling Process
    Zhai C.
    Wang J.
    Ma Y.
    Feng Z.
    Ren X.
    Ding C.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2023, 59 (23): : 331 - 342
  • [44] Optimization of the printing parameters affecting dimensional accuracy and internal cavity for HIPS material used in fused deposition modeling processes
    Kaveh, Mandi
    Badrossamay, Mohsen
    Foroozmehr, Ehsan
    Etefagh, Ardeshir Hemasian
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 226 : 280 - 286
  • [45] INVESTIGATION OF PROPERTIES OF NANOCOMPOSITE POLYIMIDE SAMPLES OBTAINED BY FUSED DEPOSITION MODELING
    Polyakov, I. V.
    Vaganov, G. V.
    Yudin, V. E.
    Ivan'kova, E. M.
    Popova, E. N.
    Elokhovskii, V. Yu.
    MECHANICS OF COMPOSITE MATERIALS, 2018, 54 (01) : 33 - 40
  • [46] An investigation on the effect of parameters of the process in fused deposition modeling on mechanical characteristics
    Priyanka, Tadikonda
    Ambatipudi, Ravindra
    Prasad, J. Laxmi
    MATERIALS TODAY-PROCEEDINGS, 2022, 64 : 452 - 454
  • [47] Experimental and Numerical Investigation of the Flexural Behavior of Fused Deposition Modeling Parts
    Gokulakrishnan, Jothibabu
    Kumar, Gurunathan Saravana
    ADVANCES IN ADDITIVE MANUFACTURING AND JOINING, AIMTDR 2018, 2020, : 347 - 355
  • [48] Investigation of Properties of Nanocomposite Polyimide Samples Obtained by Fused Deposition Modeling
    I. V. Polyakov
    G. V. Vaganov
    V. E. Yudin
    E. M. Ivan’kova
    E. N. Popova
    V. Yu. Elokhovskii
    Mechanics of Composite Materials, 2018, 54 : 33 - 40
  • [49] An investigation on circularity error of components processed on Fused Deposition Modeling (FDM)
    Sajan, Nithin
    John, T. D.
    Sivadasan, M.
    Singh, N. K.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (01) : 1327 - 1334
  • [50] An investigation on the effect of parameters of the process in fused deposition modeling on mechanical characteristics
    Priyanka, Tadikonda
    Ambatipudi, Ravindra
    Prasad, J. Laxmi
    MATERIALS TODAY-PROCEEDINGS, 2022, 64 : 452 - 454
12345