Failure investigation of a Kaplan turbine blade lever

被引：0
|
作者：
Cao, Jingwei [1 ]
Yang, Guangdong [2 ]
Luo, Yongyao [1 ]
Chen, Jie [2 ]
Liao, Run [2 ]
Wang, Zhengwei [1 ]
机构：
[1] State Key Laboratory of Hydroscience and Engineering&, Department of Energy and Power Engineering, Tsinghua University, Beijing,100084, China
[2] Yalong River Hydropower Development Co., Ltd., Sichuan,610051, China
来源：
Engineering Failure Analysis | 2022年 / 142卷
关键词：
Blade lever - Control mechanism - Dynamic stress - Failure investigation - Fluid-structure interaction - Interaction methods - Multi-body - Multibody dynamic - Operating condition - Turbine blade;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The control mechanism of the Kaplan turbine is quite complex, and many of the failure cases of the control mechanism have been reported. The present work analyzed a failure case of the blade lever based on the multibody mechanics and fluid-structure interaction method. The flow characteristics in 49 operating conditions are simulated, and the pressure on the runner surface is applied on the FEM model. A dynamic stress isoline is proposed to carry out an in-depth analysis of the failure reason of the blade lever in full operating conditions. The fracture of the blade lever could be attributed to long time operation in high dynamic stress region, which leads to the accelerated fatigue damage. Results in this paper could be helpful for the design, operation and maintenance of the Kaplan turbine. © 2022 Elsevier Ltd
引用
收藏
相关论文
共 50 条
  • [21] Numerical Simulation and Experimental Investigation of the Failure of a Gas Turbine Compressor Blade
    Nourbakshnia, N.
    Ziaei-Rad, S.
    Kermanpur, A.
    Sepehri-Amin, H.
    [J]. ADVANCES IN FRACTURE AND DAMAGE MECHANICS VII, 2008, 385-387 : 401 - +
  • [22] Investigation of LP Turbine Blade Failure in a Low Bypass Turbofan Engine
    Mishra, R. K.
    Srinivasan, K.
    Thomas, Johney
    Vaishakhi, Nandi
    Bhat, Raghavendra R.
    [J]. JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2014, 14 (02) : 160 - 166
  • [23] Stress concentration factors for pin lever of runner blade mechanism from Kaplan turbines
    Pittner, Ana-Maria
    Campian, Constantin Viorel
    Nedelcu, Dorian
    Frunzaverde, Doina
    Cojocaru, Vasile
    [J]. LATEST TRENDS ON ENGINEERING MECHANICS, STRUCTURES, ENGINEERING GEOLOGY, 2010, : 181 - +
  • [24] Failure analysis of a multiplier from a Kaplan turbine
    Diego, G
    Serrano, M
    Lancha, AM
    [J]. ENGINEERING FAILURE ANALYSIS, 2000, 7 (01) : 27 - 34
  • [25] Failure analysis of a hydraulic Kaplan turbine shaft
    Urquiza, G.
    Garcia, J. C.
    Gonzalez, J. G.
    Castro, L.
    Rodriguez, J. A.
    Basurto-Pensado, M. A.
    Mendoza, O. F.
    [J]. ENGINEERING FAILURE ANALYSIS, 2014, 41 : 108 - 117
  • [26] Multi-objective shape optimization of runner blade for Kaplan turbine
    Semenova, A.
    Chirkov, D.
    Lyutov, A.
    Cherny, S.
    Skorospelov, V.
    Pylev, I.
    [J]. 27TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS (IAHR 2014), PTS 1-7, 2014, 22
  • [27] KAPLAN TURBINE BLADE-OPERATING MECHANISM WITHOUT OIL HEAD
    SPROULE, RS
    SMALLRID.CG
    [J]. JOURNAL OF ENGINEERING FOR POWER, 1965, 87 (03): : 301 - &
  • [28] Influence of Runner Blade Angle Variations on Kaplan Turbine Transients.
    Huvet, P.
    [J]. Houille Blanche, 1986, 41 (1-2): : 137 - 147
  • [29] KAPLAN TURBINE BLADE-OPERATING MECHANISM WITHOUT OIL HEAD
    SPROULE, RS
    [J]. MECHANICAL ENGINEERING, 1965, 87 (02): : 70 - &
  • [30] Metallurgical Investigation of a Turbine Blade and a Vane Failure from Two Marine Engines
    Koul, A. K.
    Dainty, R. V.
    Marchand, C.
    [J]. JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2022, 22 (6) : 2403 - 2418
12345