Optimization of Cylindrical Stiffened Shells in Large Launch Vehicles Considering Manufacturing Tolerance

被引：0

作者：

Wang Z. ^{[1
,2
]}

Lei Y. ^{[1
,2
]}

Zhang D. ^{[1
,2
]}

Ouyang X. ^{[3
]}

Wang J. ^{[3
]}

机构：

[1] College of Aerospace Science and Engineering, National University of Defense and Technology, Changsha

[2] Hunnan Key Laboratory of Intelligent Planning and Simulation for Aerospace Missions, Changsha

[3] Beijing Institute of Aerospace Systems Engineering, Beijing

来源：

Lei, Yongjun (leiyj108@nudt.edu.cn); Lei, Yongjun (leiyj108@nudt.edu.cn) | 1600年 / Chinese Mechanical Engineering Society卷 / 57期

关键词：

Cylindrical stiffened shells; Large launch vehicles; Manufacturing tolerance; Parallel sequential approximate optimization method; The maximum manufacturing error analysis;

D O I：

10.3901/JME.2021.18.190

中图分类号：

学科分类号：

摘要：

To improve the reliability and safety of cylindrical stiffened shells in large launch vehicles under the influence of manufacturing tolerance, the optimization of cylindrical stiffened shells is carried out considering manufacturing tolerance. The collapse mechanism of the cylindrical stiffened shells is investigated. The influences of the buckling modes and key parameters of stringers on the load-carrying capacity of cylindrical stiffened shells are also analyzed and summarized, which overturns the traditional design concept of enhancing the bending stiffness of the stringers. A parallel sequential approximate optimization incorporating an exploration strategy and an exploitation strategy is proposed, which improves the computational efficiency of the post-buckling optimization of cylindrical stiffened shells and obtains an optimum structural with a reduction of 482 kg compared with the initial design. Furthermore, a novel optimization method considering manufacturing tolerance for cylindrical stiffened shells is proposed based on the sequential approximate optimization method and the maximum manufacturing error analysis, which significantly reduces the probability of the premature failure of the optimized structure under the influence of manufacturing tolerance and enhances the reliability and safety of the cylindrical stiffened shells. Some conclusions can be drawn from the results. The flexural-torsional coupling buckling of stringers becomes the main factor of the collapse of the cylindrical stiffened shells. What's more, the load-carrying efficiency of the cylindrical stiffened shells can be elevated by reducing the width-thickness of the flange plate and increasing the height-thickness of the web without local instability. Finally, the optimized structure obtained under the consideration of manufacturing tolerance has a thicker flange plate and its load-carrying performance is more reliable under the influence of the manufacturing tolerance, indicating the effectiveness of the proposed optimization method. © 2021 Journal of Mechanical Engineering.

引用

页码：190 / 203

页数：13

共 31 条

[11] LOGN Teng, GUO Xiaosong, PENG Lei, Et al., Optimization strategy using dynamic radial basis function metamodel based on trust region, Journal of Mechanical Engineering, 50, 7, pp. 184-190, (2014)
[12] PENG Lei, LIU Li, LONG Teng, Optimization stategy using dynamic radial basis function metamodel, Journal of Mechanical Engineering, 47, 7, pp. 164-170, (2011)
[13] LI Shuo, XU Yuanming, ZHANG Jun, Neural network response surface optimization design for composite stiffened structures, Journal of Mechanical Engineering, 42, 11, pp. 115-119, (2006)
[14] WANG B, MA X T, HAO P, Et al., Improved knockdown factors for composite cylindrical shells with delamination and geometric imperfections, Composites Part B: Engineering, 163, pp. 314-323, (2019)
[15] HAO P, WANG Y T, LIU C, Et al., Hierarchical nondeterministic optimization of curvilinearly stiffened panel with multicutouts, AIAA Journal, 56, 10, pp. 4180-4194, (2018)
[16] TIAN K, LI Z C, MA X T, Et al., Toward the robust establishment of variable-fidelity surrogate models for hierarchical stiffened shells by two-step adaptive updating approach, Sturctural and Multidisciplinary Optimizaiton, 61, pp. 1515-1528, (2020)
[17] TIAN K, LI Z C, HUANG L, Et al., Enhanced variable-fidelity surrogate-based optimization framework by Gaussian process regression and fuzzy clustering, Computer Methods in Applied Mechanics and Engineering, 366, (2020)
[18] HAO P, WANG Y T, LIU X X, Et al., An efficient adaptive-loop method for non-probabilistic reliability- based design optimization, Computer Methods in Applied Mechanics & Engineering, 324, pp. 689-711, (2017)
[19] HAO P, WANG Y T, LIU C, Et al., A novel non-probabilistic reliability-based design optimization algorithm using enhanced chaos control method, Computer Methods in Applied Mechanics & Engineering, 318, pp. 572-593, (2017)
[20] MENG Z, HAO P, LI G, Et al., Non-probabilistic reliability-based design optimization of stiffened shells under buckling constraint, Thin-Walled Structures, 94, pp. 325-333, (2015)

← 1 2 3 4 →