Flow boiling heat transfer enhancement in microchannels under needle electrode

被引:0
|
作者
Luo, Xiaoping [1 ]
Zhang, Chaoyong [1 ]
Zhang, Jinxin [1 ]
Guo, Feng [1 ]
机构
[1] School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou,Guangdong,510640, China
关键词
Electrodes - Heat transfer coefficients - Microchannels - Needles - Refrigerants;
D O I
10.16085/j.issn.1000-6613.2018-1965
中图分类号
学科分类号
摘要
To investigate the effect of electric field on flow boiling heat transfer in microchannels, a needle electrode arrangement was designed to introduce the electric field into the microchannels with designed capacity of system pressure at 140kPa and inlet temperature at 32.5℃ by using the refrigerant R141b as the experimental working fluid. The experimental results indicated that the electric field has a significant effect on the flow boiling heat transfer of the refrigerant R141b in microchannels, promoting onset of nucleate boiling (ONB) and enhancing heat transfer performance. Compared to the condition without electric field, the required superheat at ONB on 250V, 550V, 850V was reduced by 0.6℃, 1.26℃, and 1.78℃ respectively. The electric field can significantly enhance the boiling heat transfer in the downstream region after the ONB point. The local heat transfer coefficient increases with the increase of voltage and the partial boiling heat transfer coefficient increases by as much as 89.7% under the experimental conditions. Three heat transfer models were selected for comparison. It was found that the Sun-Mishima model has the best prediction and the model revised by introducing the voltage parameter U could better predict the experimental value of the heat transfer coefficient under the experimental conditions and the mean absolute error is 12.2%. © 2019, Chemical Industry Press. All right reserved.
引用
收藏
页码:3517 / 3524
相关论文
共 50 条
  • [21] Enhanced Flow Boiling Heat Transfer Using Radial Microchannels
    Recinella, Alyssa
    Kalani, Ankit
    Kandlikar, Satish G.
    PROCEEDINGS OF THE ASME 14TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, 2016, 2016,
  • [22] MECHANISTIC CONSIDERATIONS FOR ENHANCING FLOW BOILING HEAT TRANSFER IN MICROCHANNELS
    Kandlikar, Satish G.
    PROCEEDINGS OF THE ASME 13TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, 2015, 2015,
  • [23] Enhancement of flow boiling heat transfer with surfactant
    Qiu, YR
    Chen, WP
    Si, Q
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2000, 7 (04): : 219 - 222
  • [24] Enhancement of Flow Boiling Heat Transfer with Surfactant
    QIU Yun ren 1
    2 Editorial Office of Journal of Central South University of Technology
    Journal of Central South University of Technology(English Edition), 2000, (04) : 219 - 222
  • [25] Enhancement of flow boiling heat transfer with surfactant
    Yun-ren Qiu
    Wei-ping Chen
    Qin Si
    Journal of Central South University of Technology, 2000, 7 : 219 - 222
  • [26] Flow boiling heat transfer enhancement under ultrasound field in minichannel heat sinks
    Zhou, Jianyang
    Luo, Xiaoping
    Li, Changzheng
    Liang, Lizhe
    Wang, Gaohui
    He, Bolin
    Tian, Zhi Qun
    ULTRASONICS SONOCHEMISTRY, 2021, 78
  • [27] Experimental study of heat transfer under flow boiling ozone-safe refrigerants in microchannels
    Shamirzaev, A. S.
    Mordovskoy, A. S.
    Kuznetsov, V. V.
    XXXV SIBERIAN THERMOPHYSICAL SEMINAR, 2019, 2019, 1382
  • [28] Bubble characteristics and heat transfer performance of flow boiling in microchannels under electric and ultrasound fields
    Luo X.
    Fan Y.
    Zhou J.
    Zhang C.
    Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities, 2023, 37 (06): : 906 - 916
  • [29] Flow boiling heat transfer characteristics of two-phase flow in microchannels
    Guo, Lei
    Zhang, Shusheng
    Hu, Jing
    AIP ADVANCES, 2022, 12 (05)
  • [30] Flow pattern-based flow boiling heat transfer model for microchannels
    Costa-Patry, Etienne
    Thome, John Richard
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2013, 36 (02): : 414 - 420