Augmenting heat transfer performance in a heat exchanger with CeO2 nanofluids

被引:0
|
作者
Sreenivasulu Reddy G. [1 ,2 ]
Kalaivanan R. [3 ]
Uday Kumar R. [2 ]
Krishna Varma K.P.V. [4 ]
机构
[1] Department of Mechanical Engineering, Faculty of Engineering and Technology, Annamalai University, Annamalai Nagar
[2] Department of Mechanical Engineering, Mahatma Gandhi Institute of Technology, Telangana, Hyderabad
[3] Department of Mechanical Engineering, Annamalai University, Annamalai Nagar
[4] Department of Mechanical Engineering, Raghu Engineering College, Andhra Pradesh, Visakhapatnam
关键词
Cerium Oxide nanofluid; double pipe heat exchanger; friction factor; Nusselt number;
D O I
10.1080/14328917.2023.2213487
中图分类号
学科分类号
摘要
This work aims at determining the heat transfer enhancement as well as friction losses of CeO2 nanofluids (NFs) in a double pipe heat exchanger. Cerium Oxide nanopowder was characterised by Energy-Dispersive X-ray Spectroscopy (EDX), X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). Thermo-physical properties were measured at different temperatures and concentrations of the NF. Friction factor and Nusselt numbers were determined for various particles loading of 0.1%, 0.2% and 0.3%. Thermal conductivity enhanced by 7.92% to 12.9% than the based fluid. Experiments were performed for the range of Reynolds numbers of 2000 to 9000. Experimental results showed that for 0.3% concentration of NF, the maximum augmentation in the Nusselt number is 32.35% with a penalty of 1.18 times in terms of friction factor at a Reynolds number of 8720 in contrast to that of the carrier fluid. © 2023 Informa UK Limited, trading as Taylor & Francis Group.
引用
收藏
页码:19 / 31
页数:12
相关论文
共 50 条
  • [11] An experimental study on heat transfer performance of GO and rGO-CuO nanofluids in a heat exchanger
    Kumar, Pramanand
    Yadav, Babloo
    Kumar, Abhishek
    Bora, Chandramika
    Kumar, Arun
    Das, Subrata
    FLATCHEM, 2021, 27
  • [12] EFFECTS OF NANOFLUIDS ON HEAT TRANSFER CHARACTERISTICS IN SHELL AND TUBE HEAT EXCHANGER
    Perumal, Sakthivel
    Venkatraman, Vijayan
    Sivanraju, Rajkumar
    Mekonnen, Addisalem
    Thanikodi, Sathish
    Chinnappan, Ramesh
    THERMAL SCIENCE, 2022, 26 (02): : 835 - 841
  • [13] Heat Transfer and Pressure Drop Characteristics of Nanofluids in a Plate Heat Exchanger
    Kwon, Y. H.
    Kim, D.
    Li, C. G.
    Lee, J. K.
    Hong, D. S.
    Lee, J. G.
    Lee, S. H.
    Cho, Y. H.
    Kim, S. H.
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2011, 11 (07) : 5769 - 5774
  • [14] Heat Transfer of Aluminium-Oxide Nanofluids in a Compact Heat Exchanger
    Nasir, Faiza M.
    Bahari, Mohd. H.
    Aiman, Y.
    4TH MECHANICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 2014, 465-466 : 622 - +
  • [15] EXPERIMENTAL HEAT TRANSFER STUDIES ON COPPER NANOFLUIDS IN A PLATE HEAT EXCHANGER
    Periasamy, Manikandan
    Baskar, Rajoo
    CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY, 2021, 27 (01) : 15 - 20
  • [16] Intensification of heat exchanger performance utilizing nanofluids
    Maghrabie H.M.
    Elsaid K.
    Sayed E.T.
    Abdelkareem M.A.
    Wilberforce T.
    Ramadan M.
    Olabi A.G.
    International Journal of Thermofluids, 2021, 10
  • [17] Characterization and performance of nanofluids in plate heat exchanger
    Kumar, Vikas
    Tiwari, Arun Kumar
    Ghosh, Subrata Kumar
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 4070 - 4078
  • [18] Experimental investigation of heat transfer performance of Al2O3 nanofluids in a compact plate heat exchanger
    Ajeeb, Wagd
    Silva, Renato R. S. Thieleke da
    Murshed, S. M. Sohel
    APPLIED THERMAL ENGINEERING, 2023, 218
  • [19] Heat transfer performance and exergy analyses of a corrugated plate heat exchanger using metal oxide nanofluids
    Khairul, M. A.
    Alim, M. A.
    Mahbubul, I. M.
    Saidur, R.
    Hepbasli, A.
    Hossain, A.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2014, 50 : 8 - 14
  • [20] Heat transfer augmentation in heat exchanger by using nanofluids and vibration excitation - A review
    Razak N.F.D.
    Sani M.S.M.
    Azmi W.H.
    International Journal of Automotive and Mechanical Engineering, 2020, 17 (01): : 7719 - 7733