Study on axial compression performance of concrete stub column strengthened by prestressed steel hoop

被引：0
|
作者：
Xie J. [1 ,2 ,3 ]
Yang L. [1 ]
Xu F.-Q. [4 ]
机构：
[1] School of Civil Engineering, Tianjin University, Tianjin
[2] Key Laboratory of Coast Civil Structure Safety, Ministry of Education, Tianjin University, Tianjin
[3] Beijing Engineering Research Center of Existing Building Renovation(Tianjin branch), Tianjin
[4] China Academy of Building Research Co., LTD., Beijing
来源：
Gongcheng Lixue/Engineering Mechanics | 2020年 / 37卷 / 11期
关键词：
Active constraint; Axial compression column; Calculation model; Prestressed steel hoop; Reinforcement technology;
D O I：
10.6052/j.issn.1000-4750.2020.01.0020
中图分类号：
学科分类号：
摘要：
Both thirty-three concrete stub columns reinforced by prestressed steel hoops (PSHC) and nine unreinforced columns were tested under axial compression. The studied parameters were the hoop ratio (the spacing of hoops and the concrete diameter), the prestressing level and the initial axial compression ratio. The influences of these parameters on the carrying capacity and deformation capacity of PSHC were obtained and discussed. The results show that the bearing capacity and deformation capacity of the PSHC can be improved by 107% and 540%, respectively, compared with the comparison column. The reinforcement effect will become better with the increase of the hoop ratio. When the prestress ratio increases gradually, the carrying capacity of PSHC increases gradually and the peak strain decreases gradually. The initial axial compression ratio has no obvious influence on the reinforcement effect, the PSHC can be used as a non-unloading reinforcement method. Based on the experiment results, a prediction equation was proposed and verified by the comparison of prediction values and test data in this investigation and other references. Copyright ©2020 Engineering Mechanics. All rights reserved.
引用
收藏
页码：195 / 208
页数：13
相关论文
共 23 条
  • [11] Zhou Changdong, Bai Xiaobin, Zhao Feng, Et al., Experimental study on circular concrete short columns strengthened with pre-stressed FRP under axial compression, Journal of Structural Engineering, 34, 2, pp. 017-026, (2013)
  • [12] Guo Junping, Deng Zongcai, Lin Jinsong, Et al., Axial compression performance of concrete columns strengthened with prestressed high strength steel wire mesh, Engineering Mechanics, 31, 3, pp. 129-138, (2014)
  • [13] Yang Yong, Chen Zhan, Wang Niannian, Et al., Experimental study on aseismic behavior of RC beam-column joints strengthened with prestressed steel strips, Engineering Mechanics, 35, 11, pp. 106-115, (2018)
  • [14] Ma Qiang, Mechanism analysis of shape memory alloy reinforced concrete columns, (2013)
  • [15] Xie Jian, Yang Li, Study on strengthening technology of concrete column based on active constraint, Industrial Buildings, 49, pp. 500-504, (2019)
  • [16] Huang Kunyao, Chen Jiming, Dong Ming, Et al., Reconstruction on historic buildings and "reversible strengthening" method, Architectural Structures, 39, pp. 656-659, (2009)
  • [17] GB 50011−2010, Code for seismic design of building, (2010)
  • [18] Pan Congjian, Experimental study on the compressive behavior of circular concrete columns confined with FRP considering the secondary load, (2007)
  • [19] Richart F E., A study of failure of concrete under combined compressive stress, (1928)
  • [20] Mander J B, Priestley M J N., Theoretical stress-strain model for confined concrete, Materials in Civil Engineering, ASCE, 114, 8, pp. 1814-182, (1988)
123