Evaluation Method of Insulation Paper Deterioration Status with Mechanical-Thermal Synergy Based on Improved TOPSIS Model

被引：0
|
作者：
Jiang Y. [1 ]
Yu Y. [1 ]
Li C. [1 ]
机构：
[1] College of Electrical Engineering and Automation, Shandong University of Science and Technology, Qingdao
来源：
Diangong Jishu Xuebao/Transactions of China Electrotechnical Society | 2022年 / 37卷 / 06期
关键词：
Improved technique for order preference by similarity to an ideal solution (TOPSIS); Mechanical-thermal synergy; Multi-feature fusion; Principal component analysis; Tensile strength;
D O I：
10.19595/j.cnki.1000-6753.tces.201187
中图分类号：
学科分类号：
摘要：
In this paper, the principal component analysis (PCA) method was used to fuse multiple feature quantities to determine the comprehensive evaluation index according to the principal component, and the positive and negative ideal values are obtained by combining test data. Therefore, an improved traditional technique for order preference by similarity to ideal solution (TOPSIS) model was proposed, which can overcome the randomness caused by human factors when setting the weight matrix and obtaining the positive and negative ideal values. The effectiveness of the proposed model was verified by the example of evaluating the aging state of insulation paper for converter transformers under the combined vibration and temperature conditions. Firstly, combined with the accelerated mechanical-thermal aging experiments of the insulation paper, the mechanical and electrical properties of the insulation paper and the furfural content, the improved TOPSIS method fuses the multi-feature quantities that characterize the aging of insulation paper, such as degree of polymerization, tensile strength, furfural content and dielectric dissipation factor at characteristic frequencies. Secondly, the quantitative expression between the comprehensive evaluation index and the tensile strength of insulation paper was obtained, and the corresponding tensile strengths when the insulation performance was good and severely deteriorated were taken as the positive and negative ideal values, respectively. Finally, combined with the tensile strength loss rate of insulation paper, the principle of setting the proximity interval was given, and the quantitative evaluation of the aging state of insulation paper was realized. The results show that the improved TOPSIS method not only includes the multiple feature quantities that can characterize the aging state of insulation paper, but also overcomes the shortcomings of the traditional TOPSIS method, which can be used to accurately evaluate the aging state of insulation paper under the complex mechanical-thermal condition. © 2022, Electrical Technology Press Co. Ltd. All right reserved.
引用
收藏
页码：1572 / 1582
页数：10
相关论文
共 27 条
  • [21] Hill D J T, Darveniza M, Saha T, Et al., A study of degradation of cellulosic insulation materials in a power transformer. part 2: tensile strength of cellulose insulation paper, Polymer Degradation and Stability, 49, 3, pp. 429-435, (1995)
  • [22] Ding Hongzhi, Wang Zhongdong, On the degradation evolution equations of cellulose, Cellulose, 15, 1, pp. 205-224, (2008)
  • [23] Lin Yuandi, Yang Lijun, Liao Ruijin, Et al., Effect of oil replacement on furfural analysis and aging assessment of power transformers, IEEE Transa-ctions on Dielectrics and Electrical Insulation, 22, 5, pp. 2611-2619, (2015)
  • [24] Liao Ruijin, Feng Dawei, Li Jinzhong, Et al., Influential factors on stability of furfural in insulating oil, High Voltage Engineering, 44, 6, pp. 1729-1734, (2018)
  • [25] Xi Xiaoguang, Wang Haoming, Wang Wei, Et al., The study on the relationship of frequency domain spectroscopy of oil-paper insulation with degree of polymerization and tensile strength, IEEE Inter-national Conference on the Properties and Appli-cations of Dielectric Materials, pp. 801-804, (2018)
  • [26] Zhang Ning, Cai Jinding, Evaluation of insulation state based on the combination of analytical hierarchy process and TOPSIS, Chinese Journal of Scientific Instrument, 39, 11, pp. 35-42, (2018)
  • [27] Dong Jian, Chen Chunfang, Wen Lei, Et al., TOPSIS group decision making method with four parameters interval preference ordinal, Statistics and Decision making, 19, pp. 42-44, (2016)
123