Experimental Analysis of Double Pipe Heat Exchanger with V-cut Twisted Tape Inserts using PCM Dispersed Nanofluids

被引：0
|
作者：
Singh S.K. [1 ]
Kumar A. [2 ]
Singh P. [3 ]
Ansu A.K. [3 ]
机构：
[1] Dept. of Mech. Engg., Tezpur University, Assam
[2] Dept. of Mech. Engg, NIT Durgapur
[3] Dept. of Mech. Engg, Manipal University Jaipur, Rajasthan
来源：
International Journal of Vehicle Structures and Systems | 2022年 / 14卷 / 02期
关键词：
Entropy generation; Friction factor; Nanofluid; Nusselt number; Phase change material; V-cuts twisted tape;
D O I：
10.4273/IJVSS.14.2.09
中图分类号：
学科分类号：
摘要：
The performance of a double tube heat exchanger with V-cut twisted tape inserts (VCTT) and phase change material (PCM) dispersed nanofluid is investigated experimentally. The three water-based Al2O3, PCM, and Al2O3+PCM nanofluid with different concentrations (0.01-0.1% vol.) are used. The impacts of different geometric parameters, i.e., twist ratio (TR), depth ratio (DR) and width ratio (WR) of VCTT inserts on Nusselt number (Nu), friction factor (f) and entropy generation are examined. The outcomes expose that Nu and f increase as particle concentration increases and twisting ratio decreases. A higher Nu and f are generated by a higher DR or a lower WR. In all cases, the entropy generation of nanofluid is found to be lower than that of water. For all working fluids, a rise in TR, a fall in DR, and a rise in WR increases overall entropy generation. © 2022. MechAero Foundation for Technical Research & Education Excellence.
引用
收藏
页码：179 / 184
页数：5
相关论文
共 50 条
  • [21] Experimental analysis of heat exchanger using perforated conical rings, twisted tape inserts and CuO/H2O nanofluids
    Kumar, Anil
    Ali, Masood Ashraf
    Maithani, Rajesh
    Gupta, Naveen Kumar
    Sharma, Sachin
    Kumar, Sunil
    Sharma, Lohit
    Thakur, Robin
    Alam, Tabish
    Dobrota, Dan
    Eldin, Sayed M.
    CASE STUDIES IN THERMAL ENGINEERING, 2023, 49
  • [22] Numerical Investigation of Heat Transfer and Friction Factor Characteristics in a Circular Tube Fitted with V-Cut Twisted Tape Inserts
    Salman, Sami D.
    Kadhum, Abdul Amir H.
    Takriff, Mohd S.
    Mohamad, Abu Bakar
    SCIENTIFIC WORLD JOURNAL, 2013,
  • [23] Enhancement of Heat Transfer in a Pipe Fitted with Rectangular Cut Twisted Tape Inserts
    Anika, Onamika Ibnath
    Bhuyan, Md. Moniruzzaman
    Deb, Ujjwal Kumar
    INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 2024, 42 (05) : 1501 - 1506
  • [24] Experimental study of the thermal characteristic of a double tube heat exchanger with tapered wire coil inserts using PCM-dispersed mono/hybrid nanofluids
    Singh, Sumit Kr.
    Kumar, Vivek
    Kumar, Amit
    Yadav, Sujeet
    EXPERIMENTAL HEAT TRANSFER, 2024, 37 (07) : 1067 - 1083
  • [25] Experimental studies on laminar flow heat transfer in nanofluids flowing through a straight circular tube with and without V-cut twisted tape insert
    U. Arunachalam
    M. Edwin
    Heat and Mass Transfer, 2018, 54 : 673 - 683
  • [26] Experimental Study of Heat Transfer Enhancement in a Concentric Double Pipe Heat Exchanger with Different Axial Pitch Ratio of Perforated Twisted Tape Inserts
    Yaningsih, Indri
    Istanto, Tri
    Wijayanta, Agung Tri
    PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE AND EXHIBITION OF SUSTAINABLE ENERGY AND ADVANCED MATERIALS 2015 (ICE-SEAM 2015), 2016, 1717
  • [27] Experimental studies on laminar flow heat transfer in nanofluids flowing through a straight circular tube with and without V-cut twisted tape insert
    Arunachalam, U.
    Edwin, M.
    HEAT AND MASS TRANSFER, 2018, 54 (03) : 673 - 683
  • [28] Influence of the typical twisted tape inserts into the inner tube of double-pipe heat exchanger: A limited review
    Kadhim, Saif Ali
    Hammoodi, Karrar A.
    Ali, Hayder Mohsin
    Rashid, Farhan Lafta
    Togun, Hussein
    Alsayah, Ahmed Mohsin
    Hussein, Ahmed Kadhim
    Abd, Hussain Saad
    Omle, Issa
    RESULTS IN ENGINEERING, 2025, 25
  • [29] Application of ANN methodology to optimize the criteria of performance evaluation with multiple v-cut twisted tape inserts
    Singh, Sanjay Kumar
    Kacker, Ruchin
    Gautam, Satyam Shivam
    Tamang, Santosh Kumar
    Arora, Amit
    NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS, 2024,
  • [30] Numerical Analysis of Heat transfer Enhancement in a double pipe heat exchanger with aholed twisted tape
    Kumar, Akarsh
    Sureka, Ujjawal
    Kumar, Shiva
    INTERNATIONAL CONFERENCE ON RESEARCH IN MECHANICAL ENGINEERING SCIENCES (RIMES 2017), 2018, 144
12345