Research on time-frequency characteristics for blasting vibration signal of CO2 blasting by frequency slice wavelet transform

被引:0
|
作者
Zeng, Yongqing [1 ]
Li, Haibo [2 ]
Xia, Xiang [2 ]
Deng, Shouchun [2 ]
Zuo, Hong [2 ]
Yue, Haozhen [2 ]
Luo, Hua [1 ]
机构
[1] Hunan Institute of Science and Technology, Yueyang,414000, China
[2] State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan,430071, China
来源
Engineering Letters | 2020年 / 28卷 / 04期
基金
中国国家自然科学基金;
关键词
Velocity control - High pressure engineering - Wavelet transforms - Liquefied gases - Blasting - Vibration analysis;
D O I
暂无
中图分类号
学科分类号
摘要
—With the advancement of theoretical and practical research for high pressure gas fracturing technology, carbon dioxide (CO2) fracturing technology will have broad application prospects in the national economic construction, the study on attenuation law of peak particle velocity (PPV) with distance and time-frequency characteristics for blasting vibration signal of CO2 fracturing technology will be of great significance. On behalf of speeding up the excavation progress and studying the vibration effect of carbon dioxide blasting, liquid carbon dioxide phase change fracturing is used as the blasting source to bench excavation of mountain. The regressive analysis about propagation characteristics of blasting vibration signal along the horizontal radial, horizontal tangential and vertical direction was expressed by power function formula. The peak particle velocity of residential building is in the safety range during the CO2 blasting, which show the excellent control effect on CO2 blasting damage for near building. In terms of altogether 9 blasting vibration data along the horizontal radial, horizontal tangential and vertical direction recorded from 3 vibration monitoring points at a distance of 5 m, 15 m and 30 m away from the borehole, the dominating frequency of particle vibration produced by carbon dioxide blasting varies form 4.4 Hz to 63.7 Hz; In the process of analyzing CO2 blasting vibration signal, FSWT has good time and frequency resolution, it shows that the vibration intensity of CO2 blasting vibration sub-band signal decreases with the increase of frequency, the main energy concentrates in the range of 0-100 Hz, the CO2 blasting vibration signal in the frequency range of 0-20 Hz is more obvious and reach 92.9% of the total energy, meanwhile, the CO2 blasting vibration energy within 20-100 Hz is relatively small with 6.4% energy percentage. The analysis results can provide reference for similar design and construction of carbon dioxide blasting. © 2020, International Association of Engineers. All rights reserved.
引用
收藏
页码:1047 / 1057
相关论文
共 50 条
  • [11] Time-frequency characteristics extracting and ayalysis of blasting seismic wave based on wavelet packet transformation
    Yan, Jun-Wei
    Long, Yuan
    Fang, Xiang
    Zhou, Chun-Hua
    He, Wu-Yi
    [J]. Zhendong yu Chongji/Journal of Vibration and Shock, 2007, 26 (04): : 25 - 29
  • [12] THE WAVELET TRANSFORM, TIME-FREQUENCY LOCALIZATION AND SIGNAL ANALYSIS
    DAUBECHIES, I
    [J]. IEEE TRANSACTIONS ON INFORMATION THEORY, 1990, 36 (05) : 961 - 1005
  • [13] Research on time-frequency characteristics of contact force based on wavelet transform
    He, Fang
    Zhang, Jian
    [J]. IET ELECTRICAL SYSTEMS IN TRANSPORTATION, 2022, 12 (04) : 287 - 297
  • [14] Optimization of time-frequency resolution parameter and its application to frequency slice wavelet transform analysis of blast vibration signals
    Zhang, Sheng
    Ling, Tong-Hua
    Xu, Ze-Pei
    Huang, Kan
    [J]. Dongbei Daxue Xuebao/Journal of Northeastern University, 2015, 36 : 244 - 249
  • [15] Time-Frequency Analysis and Application of a Vibration Signal of Tunnel Excavation Blasting Based on CEEMD-MPE-HT
    Ma, Chen-Yang
    Wu, Li
    Sun, Miao
    Yuan, Qing
    [J]. Shock and Vibration, 2021, 2021
  • [16] Time-Frequency Analysis and Application of a Vibration Signal of Tunnel Excavation Blasting Based on CEEMD-MPE-HT
    Ma, Chen-yang
    Wu, Li
    Sun, Miao
    Yuan, Qing
    [J]. SHOCK AND VIBRATION, 2021, 2021
  • [17] Time-Frequency Characteristics of Box-Girder Vibration and Noise Based on Wavelet Transform
    Zhang, Xun
    Zhao, Yu
    Ruan, Linghui
    Liu, Rui
    Li, Xiaozhen
    [J]. Xinan Jiaotong Daxue Xuebao/Journal of Southwest Jiaotong University, 2020, 55 (01): : 109 - 117
  • [18] The Analysis of Axle Box Vibration Signal Based on Frequency Slice Wavelet Transform
    Wang, Fuge
    Xing, Zongyi
    Qin, Yong
    Li, Jianwei
    Chen, Yuejian
    [J]. 2015 International Conference on Computer and Computational Sciences (ICCCS), 2015, : 64 - 69
  • [19] Time-Frequency Analysis of Non-Stationary Signals using Frequency Slice Wavelet Transform
    Subbarao, M. Venkata
    Samundiswary, P.
    [J]. PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON INTELLIGENT SYSTEMS AND CONTROL (ISCO'16), 2016,
  • [20] WAVELET TRANSFORM AND TIME-FREQUENCY DISTRIBUTIONS
    POSCH, TE
    [J]. ADVANCED ALGORITHMS AND ARCHITECTURES FOR SIGNAL PROCESSING IV, 1989, 1152 : 477 - 482