Application of chemiresistive sensors based on the metal-organic framework for detecting volatile organic compounds

被引：0

作者：

Niu B. ^{[1
,2
]}

Zhang X.-L. ^{[1
,2
]}

Zhai Z.-Y. ^{[1
,2
]}

Hao X.-K. ^{[1
,2
]}

Li C.-J. ^{[1
,2
]}

机构：

[1] Beijing Higher Institution Engineering Research Center of Energy Conservation and Environmental Protection, Beijing

[2] School of Energy and Environmental Engineering, University of Science and Technology Beijing, Beijing

来源：

Gongcheng Kexue Xuebao/Chinese Journal of Engineering | 2022年 / 44卷 / 08期

关键词：

adsorption; derivatives; metal organic framework; resistive sensors; volatile organic compounds;

D O I：

10.13374/j.issn2095-9389.2021.03.26.003

中图分类号：

学科分类号：

摘要：

Chemical resistance sensors stand out among many gas sensing methods because of their simple structure, low-cost fabrication, facile integration with various electronic devices, and quick analysis; therefore, presently, they are widely used for gas sensing. Chemical resistance sensing is achieved by changing the electronic distribution of the sensing material. Among these chemical resistance sensors, the selective adsorption of gases and the corresponding detection of sensitive materials in the resistance sensor used for detecting volatile organic compounds (VOCs) are very important. In addition, measures to ensure the selectivity of detection are necessary. Therefore, the specific surface area, pore size and functional groups of sensing materials, and some auxiliary materials determine the response and sensitivity of the sensor. Metal-organic framework materials (MOFs) are a new class of organic-inorganic hybrid materials. It is characterized by rich porosity, high specific surface area, structural diversity, and chemical stability, making it exhibit good potential in the gas storage and separation field, catalysis field, and chemical sensing field. Some MOF derivatives, in addition to their properties, such as good electrical conductivity, have characteristics of MOF, such as high specific surface area. Therefore, MOF and its derivatives have been widely studied and applied as sensitive materials and filter media in gas sensors. Some MOF and MOF derivatives can be used as sensitive materials for chemical resistance sensors to improve the response to VOCs, and MOF membranes can also be used for their selective adsorption as a filter layer to improve the selectivity of sensors to the target gas. In this paper, the basic principle of chemical resistance sensors, the role, principle, and application of MOF and MOF derivatives in the detection of volatile organic compounds by resistance sensors are summarized, and the development prospect and challenges are discussed. © 2022 Science Press. All rights reserved.

引用

下载

页码：1349 / 1359

页数：10

共 26 条

[21] Yao M S, Xiu J W, Huang Q Q, Et al., Van der waals heterostructured MOF-on-MOF thin films: Cascading functionality to realize advanced chemiresistive sensing, Angewandte Chemie, 131, 42, (2019)
[22] Yao M S, Tang W X, Wang G E, Et al., MOF thin film-coated metal oxide nanowire array: Significantly improved chemiresistor sensor performance, Adv Mater, 28, 26, (2016)
[23] Zhou T T, Sang Y T, Wang X X, Et al., Pore size dependent gas-sensing selectivity based on ZnO@ZIF nanorod arrays, Sens Actuat B:Chem, 258, (2018)
[24] Jang J S, Koo W T, Kim D H, Et al., In situ coupling of multidimensional MOFs for heterogeneous metal-oxide architectures: Toward sensitive chemiresistors, ACS Central Sci, 4, 7, (2018)
[25] Xu K, Zhao W, Yu X, Et al., MOF-derived Co3O4/Fe2O3 p-n hollow cubes for improved acetone sensing characteristics, Phys E Low Dimensional Syst Nanostructures, 118, (2020)
[26] Jo Y M, Kim T H, Lee C S, Et al., Metal–organic framework-derived hollow hierarchical Co3O4 nanocages with tunable size and morphology: Ultrasensitive and highly selective detection of methylbenzenes, ACS Appl Mater Interfaces, 10, 10, (2018)

← 1 2 3 →