Effect of hydrogen peroxide treated rubber powder on viscoelasticity of rubber modified asphalt

被引：0
|
作者：
Li B. [1 ,3 ]
Wei Y. [1 ,2 ]
Wang Y. [1 ,2 ]
Cui Y. [1 ,3 ]
机构：
[1] Key Laboratory of Road & Bridge and Underground Engineering of Gansu Province, Lanzhou Jiaotong University, Lanzhou
[2] National and Provincial Joint Engineering Laboratory of Road & Bridge Disaster Prevention and Control, Lanzhou Jiaotong University, Lanzhou
[3] Gansu Province Highway Maintenance Engineering Research Center, Gansu Hengda Road and Bridge Group Co Ltd, Lanzhou
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2019年 / 36卷 / 04期
关键词：
Chemical treatment; Crumb rubber; Pore structure; Surface morphology; Viscoelasticity;
D O I：
10.13801/j.cnki.fhclxb.20180716.001
中图分类号：
学科分类号：
摘要：
The pore structure and surface morphology of rubber powder treated by hydrogen peroxide(H2O2) solution and high temperature performance of crumb rubber modified asphalt prepared from crumb rubber treated by three different proportions of H2O2 solution on the crumb rubber surface modification were studied. The pore structure, micro-morphology of the rubber powder and the viscosity, viscoelasticity of the rubber asphalt were analyzed by the adsorption-desorption experiments, scanning electron microscope test, rotational viscosity test and dynamic shear rheological test. The results show that the average pore size of the rubber powder after treatment with H2O2 solution is significantly smaller, and the pore volume and pore area of the pores change in a certain pattern. With the increase of the proportion of H2O2 solution, the contact surface between the particles increases, the floccule and pores of the powder increase, and the interface degree between the powder and the asphalt is strengthened. In the asphalt, the solubility of the rubber hydrocarbon and release of the carbon black particles of the rubber powder increase, and the mechanical properties such as the strength, elasticity and wear resistance of the rubber powder decrease. As a result, the elasticity, viscosity and high-temperature rutting resistance of the rubber asphalt decrease. © 2019, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.
引用
收藏
页码：1008 / 1016
页数：8
相关论文
共 26 条
  • [21] Chalmers G.R., Bustin R.M., Power I.M., Characterization of gas shale pore systems by porosimetry, pycnometry, surface area, and field emission scanning electron microscopy/transmission electron microscopy image analyses: Examples from the Barnett, Woodford, Haynesville, Marcellus, and Doig units, AAPG Bulletin, 96, 6, pp. 1099-1119, (2012)
  • [22] Gao J., Wei Z., Chu X., Et al., Study on the performance of composite modified asphalt with powder and rubber powder by SHRP method, Journal of China & Foreign Highway, 31, 5, pp. 250-252, (2011)
  • [23] Yang P., Zhang X., Study on compactibility of hot asphalt mixtures made with crumb rubber-modified binders, Highway Engineering, 34, 4, pp. 141-144, (2009)
  • [24] Xiao P., Reaction Mechanism of Microwave Asphalt Modified Crude Rubber Modified Asphalt, Journal of Jiangsu University(Natural Science Edition), 28, 6, pp. 491-494, (2007)
  • [25] Liu J., Wang H., Wang Y., Et al., Research on the microscopic interface mechanism of modified rubber powder based on mortar fluidity, Silicate Bulletin, 35, 11, pp. 3770-3776, (2016)
  • [26] Song Y., Du M., Yang H., Et al., Structural and viscoelastic properties of rubber materials, Acta Polymerica Sinica, 9, pp. 1115-1130, (2013)
123