Influence of structure modal characteristics of ball screw feed system on position loop gain

被引：0
|
作者：
Yang Y. [1 ,2 ]
Jiang Q. [1 ,2 ]
Liu W. [1 ,2 ]
Shen Y. [1 ,2 ]
Chen S. [3 ]
机构：
[1] College of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou
[2] Key Laboratory for Precision and Efficient Processing Technology of Suzhou City, Suzhou University of Science and Technology, Suzhou
[3] College of Automation, Nanjing University of Posts and Telecommunications, Nanjing
来源：
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2019年 / 25卷 / 05期
关键词：
Ball screw feed system; Mechanical transmission; Position loop gain; Structure flexibility; Structure modal characteristics;
D O I：
10.13196/j.cims.2019.05.010
中图分类号：
学科分类号：
摘要：
To fully consider the influence of structure modal characteristics of ball screw mechanical transmission on the whole dynamic characteristics of feed drive and servo controller, the state space reduced model of ball screw feed system based on eigenvalue model was established, which could solve the feed system dynamic response under the influence of structure modal and realize the integration with the servo control model. Then the position regulating loop model of servo system based on state space model of ball screw feed system was further built. Moreover, the constrain relationship among the modal frequency, the extremum of open-loop amplitude response and the position loop gain was derived. The influence of structure modal characteristics of ball screw feed system on position loop gain was analyzed, and also the optimal value of position loop gain under the influence of structure eigenvalue mode was obtained. By the practical example, the validity on the modal characteristic extraction calculation base on the state space model of ball screw feed system, the analysis about influence of structure modal characteristics of ball screw feed system on position loop gain, and the optimal value estimation of position loop gain under the effect of structural characteristic modal were all verified. © 2019, Editorial Department of CIMS. All right reserved.
引用
收藏
页码：1119 / 1127
页数：8
相关论文
共 22 条
  • [1] Ansoategui I., Campa F.J., Mechatronics of a ball screw drive using an N degrees of freedom dynamic model, The International Journal of Advanced Manufacturing Technology, 1, pp. 1-12, (2017)
  • [2] Yan X., Duan G., Xu H., Virtual prototyping technology oriented to complex mechatronic system, Computer Integrated Manufacturing Systems, 20, 11, pp. 2652-2659, (2014)
  • [3] Lu B., Zhao W., Zhang J., Et al., Electromechanical coupling in the feed system with high speed and high acceleration, Journal of Mechanical Engineering, 49, 6, pp. 2-11, (2013)
  • [4] Hanifzadegan M., Nagamune R., Tracking and structural vibration control of flexible ball-screw drives with dynamic variations, IEEE-ASME Transactions on Mechatronics, 20, 1, pp. 133-142, (2015)
  • [5] Zhang X., Zhang J., Zhang W., Et al., Integrated modeling and analysis of ball screw feed system and milling process with consideration of multi-excitation effect, Mechanical Systems & Signal Processing, 98, pp. 484-505, (2018)
  • [6] Pritschow G., Kosiedowski U., Optimization strategies for adaptive feed forward control, Annals of the German Academic Society for Production Engineering, 4, 2, pp. 69-72, (1997)
  • [7] Pi S., Liu Q., Liu H., 5-axis feed drive modelling and spatial contour error analysis based on dynamics of servo system, Proceedings of IEEE International Conference on Mechatronics and Automation, pp. 856-861, (2016)
  • [8] Luo L., Zhang W., Zhou M., Et al., Dynamic characteristics modeling and simulation of ball screw feed drive system based on lumped mass model, Transactions of the Chinese Society for Agricultural Machinery, 46, 12, pp. 370-377, (2015)
  • [9] Wang Y., Zhang C., Simulation modeling of a ball screw feed drive system, Journal of Vibration & Shock, 32, 3, pp. 46-49, (2013)
  • [10] Vicente D.A., Hecker R.L., Villegas F.J., Et al., Modeling and vibration mode analysis of a ball screw drive, International Journal of Advanced Manufacturing Technology, 58, 1-4, pp. 257-265, (2012)
123