Research on the change law of rail surface contact stress under the braking condition of metro turnout

被引：0
|
作者：
Zeng Z.-P. [1 ,2 ]
Xu R. [1 ]
Ruan Y. [3 ]
Li P. [3 ]
Hu J. [1 ]
机构：
[1] School of Civil Engineering, Central South University, Changsha
[2] MOE Key Laboratory of Engineering Structures of Heavy Haul Railway (Central South University), Changsha
[3] Guangzhou Metro Design & Research Institute Co., Ltd, Guangzhou
来源：
Ruan, Ying (227580052@qq.com) | 1600年 / Chongqing Wujiu Periodicals Press卷 / 50期
关键词：
Contact stress; Large slope; Rail surface; Subway; Train braking force; Turnout; Wheel-rail effect;
D O I：
10.16490/j.cnki.issn.1001-3660.2021.06.027
中图分类号：
学科分类号：
摘要：
By analyzing the mechanical behavior of the turnout rails under train braking downhill with different slopes, the influence of slope on rail surface contact stress indicators are explored, which can provide useful reference for railway line designers to make decision on railway line slopes. Aiming at the 60AT rail at the heel end of the single turnout in the subway, the finite element method is used to carry out numerical simulation to establish the refined model of the subway axle and the 60AT rail. When the slope changes from 0% to 3.0%, most of the rail stress indicators change little, only the longitudinal shear stress of the rail surface and the rail surface friction change the most, where the changes are only 8.40% and 3.18% respectively, both of which do not exceed 10%. From the perspective of rail stress analysis, slope is not a decisive factor in controlling rail damage. In order to prevent excessive local stress on the rail surface during train braking, it is recommended to perform full-length quenching treatment on the surface of the rail in this section to improve the yield strength of rails. © 2021, Chongqing Wujiu Periodicals Press. All rights reserved.
引用
收藏
页码：243 / 249
页数：6
相关论文
共 25 条
  • [21] Zhang P.-P., Jing X.-H., The finite element calculation on wheel-rail contact stress[J], Railway vehicles, 45, 9, pp. 5-8, (2007)
  • [22] Zhang J., Zhong Z., Numerical analysis of locomotive and vehicle wheel-rail contact problems[J], Journal of Tongji University (natural science), 34, 9, pp. 1231-1236, (2006)
  • [23] Wei K., He B.-L., Yang Y.-J., Effect of wheel material properties on wheel-rail contact stress based on ANASYS[J], Surface technology, 44, 5, pp. 123-128, (2015)
  • [24] Xiao Q., Lin F.-T., Wang C.-G., Et al., Analysis on wheel-rail rolling contact characteristics with variable friction coefficient[J], Journal of the China Railway Society, 34, 6, pp. 24-28, (2012)
  • [25] Zhang Y.-H., Chen C.-Y., Zhou Q.-Y., Research on the value of steel rail yield strength index[J], Railway construction, 3, pp. 92-94, (2006)
123