Structural design optimization of space gravitational wave telescope primary mirror system

The structure and supporting components of the primary mirror system of space gravitational wave telescope were designed and optimized. The side three-point support was used to restrain the mirror body with the primary mirror, and the selection and layout of support points were studied. The mirror adopted a semi-enclosed structure with back drill holes, which can achieve large bending stiffness. The lightweight structure of the mirror was optimized by finite element calculation combined with multi-objective genetic algorithm. The lightweight ratio of the mirror structure reached 74% without reducing the surface accuracy. An adjustable bi-axis bipod flexure hinge structure composed of two non-barrier series flexibility elements was designed, which can compensate the surface error of the mirror. The mathematical model of the flexible hinge parallel mechanism acting on the mirror was established, and the parameters were analyzed based on MATLAB. The parameters were corrected by finite element method. Finally, the analysis of mirror shape under space thermal load was carried out. The results show that the error of mirror shape is better than λ/60, which meets the design requirements. © 2020, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.