Experimental dynamical analysis and numerical simulation of the material properties of parts made by fused deposition modelling technologies

被引：0
|
作者：
Ficzere P. [1 ]
机构：
[1] Department of Vehicle Elements and Vehicle-Structure Analysis, Faculty of Transportation Engineering and Vehicle Engineering, Budapest University of Technology and Economics, Műegyetem rakpart 3, Budapest
来源：
Periodica Polytechnica Transportation Engineering | 2020年 / 48卷 / 03期
关键词：
Additive manufacturing; Eigenfrequency; Experimental modal analysis; Material law; Mode shapes; Polymers;
D O I：
10.3311/PPTR.13947
中图分类号：
学科分类号：
摘要：
In the recent years 3D printing became a hot topic, however it's hard to design parts without a deep understanding of the material properties. The usage of these materials in vehicles assumes the knowledge of the behavior in dynamical environment. The aim of this study is to estimate the modal parameters and the damping properties via experimental dynamic analysis of a part made from PLA. With the results we can provide data for the FEM softwares' input. After the numerical simulations the simulated results were compared to the measured data. © 2020 Budapest University of Technology and Economics. All rights reserved.
引用
收藏
页码：221 / 225
页数：4
相关论文
共 50 条
  • [1] NUMERICAL SIMULATION OF MULTI-MATERIAL GYROID STRUCTURES MADE BY FUSED DEPOSITION MODELING
    Teawdeswan, Ladpha
    Tinsley, Jake
    Carpenter, Dana
    Dong, Guoying
    PROCEEDINGS OF ASME 2024 19TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, MSEC2024, VOL 1, 2024,
  • [2] Quality assurance and process monitoring of fused deposition modelling made parts
    Stephen, A. O.
    Dalgarno, K. W.
    Munguia, J.
    HIGH VALUE MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2014, : 31 - 35
  • [3] Experimental investigation of effects of build parameters on flexural properties in fused deposition modelling parts
    Motaparti, Krishna P.
    Taylor, Gregory
    Leu, Ming C.
    Chandrashekhara, K.
    Castle, James
    Matlack, Mike
    VIRTUAL AND PHYSICAL PROTOTYPING, 2017, 12 (03) : 207 - 220
  • [4] Effects of material properties on warpage in fused deposition modeling parts
    Shofner, Meisha L. (meisha.shofner@mse.gatech.edu), 1600, Springer London (95): : 5 - 8
  • [5] Effects of material properties on warpage in fused deposition modeling parts
    Emily R. Fitzharris
    Narumi Watanabe
    David W. Rosen
    Meisha L. Shofner
    The International Journal of Advanced Manufacturing Technology, 2018, 95 : 2059 - 2070
  • [6] Effects of material properties on warpage in fused deposition modeling parts
    Fitzharris, Emily R.
    Watanabe, Narumi
    Rosen, David W.
    Shofner, Meisha L.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (5-8): : 2059 - 2070
  • [7] Experimental dynamical analysis of specimens' material properties manufactured by additive technologies
    Ficzere, Peter
    Borbas, Lajos
    MATERIALS TODAY-PROCEEDINGS, 2019, 12 : 352 - 357
  • [8] Experimental and Numerical Investigation of the Flexural Behavior of Fused Deposition Modeling Parts
    Gokulakrishnan, Jothibabu
    Kumar, Gurunathan Saravana
    ADVANCES IN ADDITIVE MANUFACTURING AND JOINING, AIMTDR 2018, 2020, : 347 - 355
  • [9] Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30
    Croccolo, Dario
    De Agostinis, Massimiliano
    Olmi, Giorgio
    COMPUTATIONAL MATERIALS SCIENCE, 2013, 79 : 506 - 518
  • [10] Controlling localised properties in fused deposition modelling parts: A feasibility study
    Srivastava, Abhishek Kumar
    Jain, Prashant K.
    1ST INTERNATIONAL CONFERENCE ON CONTEMPORARY RESEARCH IN MECHANICAL ENGINEERING WITH FOCUS ON MATERIALS AND MANUFACTURING (ICCRME-2018), 2018, 404
12345