Research Progress of 3D Printing Aluminum-based Energetic Materials

被引：0
|
作者：
Han J.-H. [1 ]
Wen M.-J. [1 ]
Chen D.-P. [1 ]
Chu Q.-Z. [1 ]
机构：
[1] State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing
来源：
Huozhayao Xuebao/Chinese Journal of Explosives and Propellants | 2023年 / 46卷 / 11期
关键词：
3D printing; energetic material; ink optimization; micro structure; nano-aluminum powder;
D O I：
10.14077/j.issn.1007-7812.202304007
中图分类号：
学科分类号：
摘要：
The application of 3D printing technology in the performance regulation and control of aluminum-based energetic materials were exposited. The effects of 3D printing ink optimization and microstructure optimization on the burning rate and mechanical properties of molding materials were discussed. It is found that the addition of fluoropolymer or detachable polymer in the ink can significantly affect the initial reaction path of aluminum powder and adjust its ignition and combustion characteristics. As a binder in the application of energetic materials, it can rapidly release a large amount of gas products and inhibit the agglomeration of aluminum powder, which is a new path for future binder selection. The microstructure optimization of 3D printing energetic materials mainly utilizes methods such as changing the spatial structure, distribution gradient, and specific structure of components to improve the combustion efficiency of energetic materials. According to the current achievements and development trends, the combination of ink and microstructure optimization will be a potential direction for the manufacture process of energetic materials in the future. With 94 references. © 2023 China Ordnance Industry Corporation. All rights reserved.
引用
收藏
页码：937 / 949
页数：12
相关论文
共 94 条
  • [91] HE W, AO W, YANG G, Et al., Metastable energetic nanocomposites of MOF-activated aluminum featured with multi-level energy releases, Chemical Engineering Journal, 381, (2020)
  • [92] TANG D Y, LYU J, HE W, Et al., Metastable intermixed core-shell Al @ M (IO<sub>3</sub>)x nanocomposites with improved combustion efficiency by using tannic acid as a functional interfacial layer, Chemical Engineering Journal, 384, (2020)
  • [93] HE W, TAO B, YANG Z, Et al., Mussel-inspired polydopamine-directed crystal growth of core-shell n-Al@ PDA@ CuO metastable intermixed composites, Chemical Engineering Journal, 369, pp. 1093-1101, (2019)
  • [94] ZHANG T, YAO N, ZHOU C, Et al., Combustion characteristics of cross-1inked fluorinated polymer supported aluminum/oxidizer microsphere in HTPB propellant, Fire Phys Chem, 2, 1, pp. 20-27, (2022)
12345678910