Precipitation behavior and mechanical properties of 7A62 aluminum alloy after thermal-magnetic aging

被引：0
|
作者：
Ding X. [1 ]
Liu W. [1 ,2 ]
Huang H. [3 ]
Hu Q. [1 ]
Zhang Q. [1 ]
Song Y. [1 ]
机构：
[1] School of Mechanical and Electrical Engineering, Hunan University of Science and Technology, Xiangtan
[2] School of Marine Equipment and Mechanical Engineering, Jimei University, Xiamen
[3] Jiang Lu Electromechanical Group Co., Ltd., Xiangtan
来源：
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals | 2024年 / 34卷 / 03期
基金：
中国国家自然科学基金;
关键词：
7A62 aluminum alloy; mechanical property; precipitation behavior; thermal-magnetic aging;
D O I：
10.11817/j.ysxb.1004.0609.2023-44407
中图分类号：
学科分类号：
摘要：
The effects of thermal-magnetic aging on precipitation behavior and mechanical properties of 7A62 aluminum alloy were studied by hardness test, TEM, XRD and tensile properties tests. The results show that under the effect of the thermal magnetic coupling aging, the dislocation mobility in 7A62 aluminum alloy is enhanced and the movement rate of solute atoms is accelerated, which promote the nucleation and growth of precipitates. The peak aging time is greatly shortened, which is only 1/3 of the peak aging time without magnetic addition (i.e. the peak aging time is shortened from 24 h to 8 h). The magnetic field induces the dislocation depinning and promotes the PFZ of grain boundary broadening, and the elongation of 7A62 aluminum alloy after thermal-magnetic peak aging increases by 15.6% than that after conventional peak aging. Therefore, the thermal magnetic coupling can accelerate the aging precipitation process of aluminum alloy, improve its mechanical properties, and significantly improve the production efficiency of aluminum alloy. © 2024 Central South University of Technology. All rights reserved.
引用
收藏
页码：751 / 762
页数：11
相关论文
共 34 条
  • [11] LIU Y Z, ZHAN L H, MA Q Q, Et al., Effects of alternating magnetic field aged on microstructure and mechanical properties of AA2219 aluminum alloy[J], Journal of Alloys and Compounds, 647, pp. 644-647, (2015)
  • [12] BABUTSKYI A, MOHIN M, CHRYSANTHOU A, Et al., Effect of electropulsing on the fatigue resistance of aluminium alloy 2014-T6, Materials Science and Engineering A, 772, (2020)
  • [13] SONG Y F, DU W, ZHAO L Z, Et al., The coupling influences and corresponding mechanisms of high efficiency thermal-magnetic treatments on the dimensional stability of Al-Cu-Mg alloy, Journal of Alloys and Compounds, 928, (2022)
  • [14] CAO Y H, HE L Z, ZHANG L, Et al., Effects of magnetic field and hot rolling on microstructures and properties of cryoECAPed 1050 aluminum alloy during annealing[J], Transactions of Nonferrous Metals Society of China, 26, 3, (2016)
  • [15] LI G R, CHENG J F, WANG H M, Et al., Influence of static magnetic field on microstructure and properties of 7055 aluminum alloy[J], Rare Metal Materials and Engineering, 48, 4, (2019)
  • [16] YOUSSEF K M, SCATTERGOOD R O, MURTY K L, Et al., Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility, Scripta Materialia, 54, 2, (2006)
  • [17] WANG H, PAN Y Z, FU X L, Et al., Dislocation density and its evolution of aluminum alloy 7050 based on anisotropy, Journal of Mechanical Engineering, 57, 18, (2021)
  • [18] DESCHAMPS A, BRECHET Y, GUYOT P, Et al., On the influence of dislocations on precipitation in an Al-Zn-Mg alloy[J], International Journal of Materials Research, 88, 8, (1997)
  • [19] SUN W W, ZHU Y M, MARCEAU R, Et al., Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity, Science, 363, 6430, (2019)
  • [20] LIU W H, XIAO M Y, SONG Y F, Et al., Effect of interrupted-aging on microstructure and mechanical properties of 7B52 laminated aluminum alloy, The Chinese Journal of Nonferrous Metals, 32, 1, (2022)
1234