Towards the insights into the deactivation behavior of acetylene hydrogenation catalyst

被引：0

作者：

HaiXia Su ^{[1
,2
]}

Yang Jiao ^{[2
]}

JianGong Shi ^{[2
]}

ZhiWei Yuan ^{[2
]}

Di Zhang ^{[1
]}

XuPeng Wang ^{[1
]}

Jing Ren ^{[2
]}

Dan Liu ^{[3
]}

JianZhou Gui ^{[1
]}

HaiYang Gao ^{[1
]}

XiaoLi Xu ^{[2
]}

机构：

[1] State Key Laboratory of Separation Membranes & Membrane Processes, Tianjin Key Laboratory of Green Chemical Technology and Process Engineering,School of Material Science and Engineering, Tiangong University

[2] Institute of Engineering Technology, Sinopec Catalyst Co, Ltd

[3] State Key Laboratory of Separation Membranes and Membrane Processes, Tianjin Key Laboratory of Green Chemical Technology and Process Engineering,School of Chemistry, Tiangong

来源：

Petroleum Science | 2024年 / 21卷 / 02期

关键词：

D O I：

暂无

中图分类号：

TQ221.211 []; TQ426 [催化剂（触媒）];

学科分类号：

080502 ; 081705 ;

摘要：

A series of model catalysts were obtained by treating commercial fresh and spent catalysts unloaded from the factory with different methods, including green oil dipping, extraction and high-temperature regeneration; finally, the deactivation behavior of the commercial catalyst for acetylene hydrogenation were studied. The influence of various possible deactivation factors on the catalytic performance was elucidated via detailed structural characterization, surface composition analysis, and activity evaluation.The results showed that green oil, carbon deposit and sintering of active metal were the main reasons for deactivation, among which green oil and carbon deposit led to rapid deactivation, while the activity could be recovered after regeneration by high-temperature calcination. The sintering of active metal components was attributed to the high-temperature regeneration in hydrothermal conditions, which was slow but irreversible and accounted for permanent deactivation. Thus, optimizing the regeneration is expected to extend the service life of the commercial catalyst.

引用

页码：1405 / 1414

页数：10

共 50 条

[31] Regeneration of supported palladium catalyst for selective hydrogenation of acetylene
Almanza, LO
Martinez, OI
CATALYST DEACTIVATION 2001, PROCEEDINGS, 2001, 139 : 311 - 318
[32] REACTIONS OF ACETYLENE DURING HYDROGENATION ON PD BLACK CATALYST
MARGITFALVI, J
GUCZI, L
JOURNAL OF CATALYSIS, 1981, 72 (02) : 185 - 198
[33] Hydrogenation of acetylene–ethylene mixtures on a commercial palladium catalyst
A. Borodziński
Catalysis Letters, 1999, 63 : 35 - 42
[34] Fabrication of a PdAg mesocrystal catalyst for the partial hydrogenation of acetylene
He, Yufei
Liu, Yanan
Yang, Pengfei
Du, Yiyun
Peng, Junting
Cao, Xingzhong
Yang, Jing
Li, Dianqing
JOURNAL OF CATALYSIS, 2015, 330 : 61 - 70
[35] The influence of catalyst restructuring on the selective hydrogenation of acetylene to ethylene
Jin, YM
Datye, AK
Rightor, E
Gulotty, R
Waterman, W
Smith, M
Holbrook, M
Maj, J
Blackson, J
JOURNAL OF CATALYSIS, 2001, 203 (02) : 292 - 306
[36] HYDROGENATION KINETICS OF ACETYLENE ON A PALLADIUM CATALYST IN PRESENCE OF ETHYLENE
MENSHCHIKOV, VA
FALKOVICH, YG
AEROV, ME
KINETICS AND CATALYSIS, 1975, 16 (06) : 1335 - 1338
[37] Incorporation of deuterium in coke formed on an acetylene hydrogenation catalyst
Larsson, M
Jansson, J
Asplund, S
JOURNAL OF CATALYSIS, 1996, 162 (02) : 365 - 367
[38] Characterization and deactivation of sulfided red mud used as hydrogenation catalyst
Alvarez, J.
Rosal, R.
Sastre, H.
Diez, F.V.
Applied Catalysis A:General, 1995, 128 (2-3):
[39] CHARACTERIZATION AND DEACTIVATION OF SULFIDED RED MUD USED AS HYDROGENATION CATALYST
ALVAREZ, J
ROSAL, R
SASTRE, H
DIEZ, FV
APPLIED CATALYSIS A-GENERAL, 1995, 128 (02) : 259 - 273
[40] Pd-Ag/Al2O3 catalyst: Stages of deactivation in tail-end acetylene selective hydrogenation
Ravanchi, Maryam Takht
Sahebdelfar, Saeed
APPLIED CATALYSIS A-GENERAL, 2016, 525 : 197 - 203

← 1 2 3 4 5 →